RP2350 2.8inch Touch Display Dev Board, RP2350 MCU Board with 2.8inch LCD, 240320 Pixels, 5-Point Capacitive Touch IPS SPI Display, Dual-core&Dual-Architecture, Multiple Interfaces

OverviewRP2350-Touch-LCD- 2.8 is a low-cost, high-performance MCU board designed by Waveshare. Onboard 2.8 inch capacitive touch display, capable of smoothly running GUI programs such as LVGL. Integrates Lithium battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, and so on, making it easy to develop and integrate into products quickly. Features--RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom--Adopts unique dual-core and dual-architecture design: dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz--520KB of Static Random-Access Memory, and 16MB onboard Flash memory--Onboard 2.8 inch LCD display, 240320 resolution, 262K color--Supports capacitive touch function controlled via I2C interface, 5-point touch, with interrupt support--Adapting UART, I2C and some IO interfaces, integrates full-speed USB port--Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc. --Drag-and-drop programming using mass storage over USB--Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenariosPackage ContentRP2350-Touch-LCD- 2.8 x18 2W speaker 1SH 1.0 4PIN cable 2SH 1.0 12PIN cable 1NOTE: Online Development Resources and Technical Support are provided, please feel free to contact us if you have any problem!