Mechanical structureThe C ring is placed in the groove near the interface end of the lower cover body. The contact pin and the ground pin pass through the C ring in sequence and put them into the lower cover body. Close the upper cover body and the lower cover body to complete the assembly of the body set. The body set and the shell are locked to each other with screws. The sleeve is fixed on the end of the shell with screws. Screws with the finished products. (4/3mm 4 screws per each.
)Material: Contact
Pin: Pure Silver (silver contains over 99.9 %)Ground
Pin: Pure Silver (silver contains over 99.9 %)
C Ring: Phosphor Bronze (C5441)
Body: Glass fiber reinforced nylon (Red /
White)Shell: Stainless steel (SUS304)
Sleeve: POM
Screw: Stainless steel (SUS304)
Finish: Contact
Pin: noneGround
Pin: noneC
Ring:
noneBody:
noneShell: none/
laser engravingSleeve:
noneScrew: noneElectrical
Characteristics: Contact resistance < 0.3 mOhm (It was test by ARJ-4045.
)Dimension: Biggest OD 13.9 mmCable holeSleeve is contained in finished product 9.0 mm. Sleeve is not contained in finished product 11.5 mm. Total Length 45.7 mm