Your Browsing History
- Free 30-day Returns
$154.99
Meet Your Seller
Hebbeko 2 Port RCA Audio Over Fiber Optic Extenders, Unbalanced Analog Audio Fiber converters adapters,ST Optical Interface Singlemode Single Fiber up to 20Km Multimode 500m A Pair
- This Audio over Fiber Extender can extend 2 channels of Unbalanced RCA Audio over an optical fiber cable to far end. It allows 2 RCA audio device synchronous transmission, 2RCA Audio signal is transmitted from T (TX) in the direction of R (RX)
- With ST optical interface,Compatible with Singlemode and Multimode optical fiber cable. Single mode single fiber up to 12.4 miles (20Km), Mutlimode single fiber up to 0.31 miles(500meters)
- Professional quality ,Adopt FPGA, digital coding/decoding and clock recovery technology, high integration and high stability ,it is much better than ordinary one on marketing
- Typically used in applications for Campus, public places,Staging,Theaters,Stadiums,Parks,Broadcast,studio audio and more. and are available for stand-alone and desktop type, or wall mounted, installations
- No Need to set up ,Simply plug in an Optical ST port and RCA audio connectors at TX and RX sides, It works immediately
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
OverviewUnbalanced analog audio optical transceiver is a single chip stereo analog data fiber optical converter that uses bit-stream converter (ADC) technology. The low power consumption and low voltage requirements make the device ideal for use in low-voltage and low-power portable data and audio devices. Audio Specification1. Full-size output sine wave, 997 Hz; MCLK = 12.288 MHz. Fs basic probability mode = 48 kHz, SCLK = 3.072 MHz, 2. Measurement bandwidth 10hz to 20khz; Fs is high rate mode = 96 kHz, FeaturesMulti-format Output Interface1. Compatible with I2S bus and MSB format2.
Serial output up to 24 bitsAdvanced Audio Configuration1. Stereo single - end input configuration2. High linearity, dynamic range and low distortionOptical
Port: Optical
connector: ST.
Wavelength: 1310nm&1470nm~1610nm. Tx power -7dbRx sensitivity -24dbTransmission range: 0-20km for SM, 0-500m for MM.
Optical fiber type: universal 9/125u single mode, 50/125u or 62.5 /125u multimode.
Audio index: Dynamic
bandwidth: 96dBTotal
harmonic distortion (THD): -68dBSignal-to-noise
ratio: -68dBSignal-to-noise
ratioS/N: 60dBSampling
frequency: 32kHz 44.1 kHz 48kHzAudio
A/D sampling: 24
BitFrequency response: 1020kHzGain
mismatch between channels: 0.1
dBGain error: 5%Gain
drift: 100
ppm/CAmplitude-frequency characteristic: 0.5
dBAudio input/output impedance: 600
balanceAudio maximum input/output voltage: 0~2VLED
indicators:
PWR: ON upon power in.
Off upon powered offFIBER: Off when fiber optical signal is blocked or excessive attenuation. On when fiber signal is received properlyGeneral
Spec: Operating
temperature: -20
to 70CStorage temperature: -40
to 80CRelative humidity: 5
to 95%non-condensingWorking life (MTBF): 100, 000hoursInstallation: stand-alone. Support wide range working
Voltage: AC100-240V 50/60Hz, DC5VPower plugUS/EU/UK/AU standard is optional.
Dimension: 104mm (L) 104mm (W) 28mm (H).
Package include: 1x Unbalanced RCA Audio Fiber Transmitter1x Unbalanced RCA Audio Fiber Receiver2x Power supply adapter (US standard) 1x FREE 3M ST-ST Fiber patch cord1x Manual.
Serial output up to 24 bitsAdvanced Audio Configuration1. Stereo single - end input configuration2. High linearity, dynamic range and low distortionOptical
Port: Optical
connector: ST.
Wavelength: 1310nm&1470nm~1610nm. Tx power -7dbRx sensitivity -24dbTransmission range: 0-20km for SM, 0-500m for MM.
Optical fiber type: universal 9/125u single mode, 50/125u or 62.5 /125u multimode.
Audio index: Dynamic
bandwidth: 96dBTotal
harmonic distortion (THD): -68dBSignal-to-noise
ratio: -68dBSignal-to-noise
ratioS/N: 60dBSampling
frequency: 32kHz 44.1 kHz 48kHzAudio
A/D sampling: 24
BitFrequency response: 1020kHzGain
mismatch between channels: 0.1
dBGain error: 5%Gain
drift: 100
ppm/CAmplitude-frequency characteristic: 0.5
dBAudio input/output impedance: 600
balanceAudio maximum input/output voltage: 0~2VLED
indicators:
PWR: ON upon power in.
Off upon powered offFIBER: Off when fiber optical signal is blocked or excessive attenuation. On when fiber signal is received properlyGeneral
Spec: Operating
temperature: -20
to 70CStorage temperature: -40
to 80CRelative humidity: 5
to 95%non-condensingWorking life (MTBF): 100, 000hoursInstallation: stand-alone. Support wide range working
Voltage: AC100-240V 50/60Hz, DC5VPower plugUS/EU/UK/AU standard is optional.
Dimension: 104mm (L) 104mm (W) 28mm (H).
Package include: 1x Unbalanced RCA Audio Fiber Transmitter1x Unbalanced RCA Audio Fiber Receiver2x Power supply adapter (US standard) 1x FREE 3M ST-ST Fiber patch cord1x Manual.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Tactifans Outdoor Sport Goods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...