Your Browsing History
Meet Your Seller
10pcs ESP32 ESP-32 CP2012 30 Pin WiFi+Bluetooth Dual Core ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
- ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
- The ESP32 ESP32S development board offers a rich set of peripheral interfaces, including GPIO, UART, SPI, I2C, and more, allowing for easy connectivity to a wide range of sensors
- ESP32 Mirco USB interface,Provides GPIO, UART, SPI, I2C and other interfaces, supports touch sensing, infrared remote control, DAC and other functions, suitable for a variety of electronic projects.
- The esp-32 esp32 board equipped with 30pins.enables excellent connection to the breadboard.The main body of the module is ESP-WROOM-32 module, which is powerful and supports LWIP protocol, freertos. The peripheral adopts USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by connecting to the computer through USB.
- What you will get : 10PCS ESP32 ESP-WROOM-32 Development Board WiFi + Bluetooth CP2102 Dual Core Microcontroller
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Feature: 1. The module is the ESP- WROOM-32 development board, and the ESP- WROOM32 parameter characteristic is also the parameter characteristic of the module. 2. Low power dual core 32-bit CPU, which can be used as application processor; 3. Support UART / SPI / I2C / PWM / DAC / ADC and other interfaces; 4. Support openOCD debugging interface; 5. It supports multiple sleep modes, and the current reaches 6.5 ua in deep sleep; 6. Embedded LwIP and FreeRTOS; 7. Support STA/AP/STA+AP mode; 8. Support Smart Config / Airkiss one key distribution network; 9. General at command, easy to use; 10. Support local serial port upgrade and remote upgrade (FOTA).
Specification: SPI
Flash: default
32MbitSupporting interfaces: UART, SPI, SDIO, I2C, PWM, I2S, IR, ADC, DAC
On chip sensors: Hall sensor, temperature sensor, capacitive
touch sensorIO port: 22pcsPower
consumption: 300mA
3.3VS ecurity: WPA / WPA2 / WPA2 Enterprise / WPS
Power supply range: 3V~ 3.6V ( 3.3V recommended), Can be directly powered by 5V USB.
Working temperature: - 20 ~ 85
Storage environment: - 40 ~ 90, <90%
RHProduct size: 52 * 29 * 15mm/ 2.04 * 1.14 * 0.59 ''Package include10x ESP32 development board
Specification: SPI
Flash: default
32MbitSupporting interfaces: UART, SPI, SDIO, I2C, PWM, I2S, IR, ADC, DAC
On chip sensors: Hall sensor, temperature sensor, capacitive
touch sensorIO port: 22pcsPower
consumption: 300mA
3.3VS ecurity: WPA / WPA2 / WPA2 Enterprise / WPS
Power supply range: 3V~ 3.6V ( 3.3V recommended), Can be directly powered by 5V USB.
Working temperature: - 20 ~ 85
Storage environment: - 40 ~ 90, <90%
RHProduct size: 52 * 29 * 15mm/ 2.04 * 1.14 * 0.59 ''Package include10x ESP32 development board
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Hanbo Supply Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...











