Note: 1. This product power from POE, need to connect with a 802.3AF Standard 48V POE Switch. 2. This camera default 3MP & H. 265, if your NVR do not support 3MP or H. 265, you can change our camera into 1080P (2MP) and H. 264.3. IP camera will create more heat and the case of this camera is small, so after you operate the camera for a while, you will feel the camera is hot. And do not worry, it is normal and safe, hope you can understand. * High Resolution 3.0 Megapixel 1/3'' CMOS Sensor* 2304*1296P resolution 20fps* HD 3.0MP 6-22mm Zoom Lens* Support POE, reduce the trouble of cable arrangement. * Have auxiliary power connector, can use like a Non-POE IP camera. * Support H. 265 encode, compare with H. 264, transit same quality image only need half of the bandwidth; Record same quality image only need half of the storage; * Also support H. 264 encode, so it can be compatible with both H. 264 and H.
265 device. * Support iPhone, Android smartphone* P2P Remote Viewing* Support Motion detection, Email Alarm function*
Metal Material ShellCameraModel: I712-2-POE-FHW
Resolution: 2304 x 1296P 3.0
Mega PixelsSensor: FH8852+GC2053Min
illumination: 0.1L ux @(F 1.2, AGC
ON)Frame rate:
20fpsLens: 6-22mm Zoom LensO nviif
Port: 6688Lens
interface type: M12Compression
Format: H. 265/H.
264Storage: NVR or
ComputerIP address: Dynamic
(Default) /StaticSmart alarm: Motion detection,
Email alarmSupport protocol: O NVIIF, HTTP, TCP/IP, ICMP, RTSP, RTP, RTCP, SMTP, DHCP, DNS, PPPoE, NTP
Ethernet: 10M/100M mbps
Ethernet (RJ-45)GeneralOperating Temperature: -25C~60COperating
Humidity: 10%~90%Power
Supply: POEPOE
Standard: 802.3
afDimension (cm): 5.6 x 4.6 x 6.3 cmWeight: 0.25
kgPackage contents: 1 x Camera1 x User Manual (English) 1 x Screws Set