PCIe 5.0 Bifurcation x16 to x8x8, x16 to Dual x8 Bifurcation Riser Card

Important Notice: Whether this product works properly depends on whether your motherboard, CPU, and BIOS support PCIe bifurcation. Not all motherboards support this function. Please confirm x8+x8 bifurcation support in BIOS before buying, and configure the BIOS to x8+x8 mode prior to use. PCIe 5.0 speed is only achievable if your motherboard, CPU and graphics card all support PCIe 5.0; otherwise it will run at PCIe 4.0 speed. ^^ PCIe 5.0
FullBandwidth Split Solution: This bifurcation kit features an MCIO interface, splitting a single PCIe 5.0 x16 slot (theoretical data rate: 512GT/s) into two independent PCIe x8 channels (theoretical data rate: 256GT/s, perlane 32GT/s). It preserves full PCIe 5.0 bandwidth with no performance loss, ideal for dualGPU external graphics Cards, AI rendering and multicard computing. Backward compatible with PCIe 4.0 and PCIe 3.0. ^^ This product is a PCIe bifurcation expansion kit. It allows one PCIe slot on the motherboard to be split through an adapter board and riser cables, so multiple PCIe expansion devices can be connected. It can be used for graphics cards, capture cards, network cards, U. 2 SSD and other PCIe expansion devices.
^^ Easy to Use: Plug one end of the two MCIO 8i cables into Slot 1 and Slot 2 on the main card respectively, then connect the opposite ends to the slots on the two breakout cards. For x8+x8 split mode, plug both cables into Slot 1 of each breakout card. Insert the main card into your motherboards first PCIe x16 slot, and install your PCIe devices into the PCIe x16 slots on the breakout cards. Each breakout card requires a 6pin power connection. Simply set the corresponding PCIe bifurcation mode in BIOS, and the kit is ready for use.
^^ Package Include: 1 pcs Main Card wtih MCIO ports, 2pcs breakout board, 2pcs MCIO 8i cables 50cm