Quick and easy setup with the DRIVECADDY hot-plug caddyPress the release button to open the handle, then slide the hot-plug caddy into or out of the server. The DRIVECADDY 2.5 -inch hot-plug tray is designed for connecting a hard drive (SAS/SATA/SSD/NVMe, depending on your server and backplane) to a server backplane. If your server backplane is connected to a RAID controller (such as Dell PERC), RAID volumes can be created or adjusted through the controller configuration menu after installation. Design and packaging DRIVECADDY 9-pack drive enclosure brackets Compatible with Dell PowerEdge 2.5 -inch drive bays for SAS/SATA/SSD/NVMe drives (depending on system configuration) Front sticker labels 36 mounting screws Screwdriver TweezersPowerEdge servers may use different drive bay sizes.
Please verify that your server supports the smaller 2.9 -inch hot-plug drive bay before purchase. PowerEdge 17th Generation smaller 2.9 -inch hot-plug drive bayR470 tray, R570 frame, R670 caddy, R770 tray, R6715 mount, R6725 case, R7715 bracket, R7725 caddy, R7725xd sledPowerEdge 16th Generation smaller 2.9 -inch hot-plug drive bayT560 caddy, R660 tray, R6615 frame, R6625 enclosure, R7615 holder, R7625 carrier, R760 case, R760xa chassis, R760xs mount, R860 bracket, R960 framework, HS5610 support, HS5620 caddyPowerEdge 15th Generation smaller 2.9 -inch hot-plug drive bayR350 tray, R450 frame, T550 enclosure, R550 holder, R650xs carrier, R750xs case, R650 chassis, R750 mount, R750xa bracket, R6515 framework, R6525 support, R7515 caddy, R7525 tray, XE8545 framePowerEdge 14th Generation smaller 2.9 -inch hot-plug drive bayR340 enclosure, R440 holder, R640 carrier, R740 case, R740xd chassis, R840 mount, R940 bracket, R940xa framework, R6415 support, R7415 caddy, R7425 trayOther systems smaller 2.9 -inch hot-plug drive bayXC
Series appliances: XC640-4, XC640-4i, XC740xd-24, XC940-24, XC6420-6C6520, C6620, C6420/25 enclosure