Only need to connect the monitor power wire with car electronics sytem: Red and yellow wire to car Positive/Live, Black wire to GND, Green wire to reversing gear Trigger+ (or No need to connect) easy to install easy to use9" CAR TFT LCD MONITOR
Display Size: 9
Inch AHD DVR ScreenPower requirement: DC
12V-24VConsumption:
8WVideo: 2 channelS input, Split Screen DisplayOur Split monitor can display two video at same time, you can also switch to AHD 1 or AHD 2 by "V1/V2" buttonBuild in SD DVR Recording functions, Max support 128GB (SD card not include) Reversing Grid Lines Can be turn on or offPlease set it with the monitor system "Video Settings" Car reversing Line on, and Please be sure that you need to connect the green cable with reversing trigger+AHD 2 will show with Grid Lines if you set "reversing line on" backup view priorityNet
Weight: Approx.
1000gLauguage: English, ChineseAHD 8 LED Car Front/Rear View Camera100% Not Wash Out CCD Sensor Mirror /None mirror image (Front and rear
View) TV system: PAL/NTSC
Lens: 2.1 mm (170 View angle )
Number of pixels: 2
Megapixel CameraMinimum illumination: 0 LUX
Backlight compensation: AutoWhite
Balance: Auto TracingAuto
Gain Control: AutomaticNight
vision: YesVideo
Output: 4Pin
Connectorwork Temperature: -20C~+60CPower
Requirement: DC
12V-24VWeight: Approx
200gWaterproof: IP
69Packaging include: 1 x 4Pin 9" AHD Rear view Monitor1 x Dashboard Bracket1 x Remote controller1 x Monitor Power Video Harness Cable1 x 4Pin 8 LED AHD Rear View Camera1 x 4Pin 15M/50ft Cable1 x Manual