BuyUneed 2:1 Heat Shrink Braided Sleeving 3/4" ID x 30 ft

3/4" Inner Diameter, 2:1 Shrink Ratio Expanded I. D. 3/4" (20 mm). Recovered I. D. 3/8" (10 mm). To confirm fit, measure the outer diameter of your wire bundle or hose before ordering the sleeve must slide over the bundle before heat is applied. Built from braided polyester yarn over a polyolefin inner layer. Includes 30 feet of sleeving. Black. ^^ Braided Construction Stays Flexible After Shrinking The woven polyester braid keeps the sleeve flexible along bends and routing changes after heat is applied unlike standard heat shrink tubing, which stiffens more rigidly once set.

The braided outer layer also resists abrasion at contact points with brackets, clips, and chassis edges.
Temperature range: -40F to 284F (140C) continuous. ^^ 2:1 Shrink Ratio Shrinks to half its original I. D. for a snug fit around wire bundles. Holds bundle shape and prevents wires from shifting at routing bends. No adhesive. Apply evenly with a heat gun. ^^ Cut to Any Length Scissors or utility knife. Braided ends hold without fraying. Flexible before heating, sets slightly firmer once shrunk to maintain bundle shape along the route. ^^ For Larger Wire Bundles in Automotive Harnesses, Winch Lines, and Trailer Pigtails Fits bundles up to 3/8" ( 9.5 mm) OD after shrinking.
Available in 8 diameters: 1/4", 3/8", 1/2", 3/4", 1", 1-1/8", 1-3/8", 2".