PoE Texas IEEE 802.3af 12v Splitter and 8 Port PoE Switch

GAF-12v12w: A Gigabit, Mode A/B Inline PoE Splitter for 12 volt devices like IP Cameras, Media Players, and Speakers. Instantly convert IEEE 802.3 af PoE to 12 volts for non-PoE devices. The 5.5 mm x 2.1 mm barrel fits most 12-volt devices. 12v splitter works with 802.3 af PoE (Power over Ethernet) to provide 12 watts of continuous 12 volt power. Use with your existing PoE Switch or 48v PoE Injector to power 12 volt non-PoE devices such as outdoor cameras. Use with any 802.3 af PoE switch like Cisco or Netgear with 10/100 or Gigabit speeds. Compatible with Arduino, Foscam, Wansview, Airsight, EasyN, Escam, Q-See, Apexis, Wanscam and other non-PoE devices. (For the Roku Ultra, see our GAT-12v25w splitter) A PoE power splitter that converts and 'splits' 44-56 volts of PoE into 12 volts of power on the DC barrel, along with divided 10/100/1000 Gigabit data on the RJ45 connector. Now you can safely extend DC power up to 328 feet away from a power source.
GATS-10-8-51V120W: Power up to four IEEE 802.3 at standard IP cameras, desktop phones, WiFi access points, or other low voltage devices over 300 feet from PoE source. Our plug and play 8 port PoE switch automatically detects devices. This device has two gigabit uplink ports and eight 10/100 Mbps ports. This 8 port power over ethernet switch can support up to eight 802.3 af/at devices with 25.5 watts max power available from a single PoE+ port. Mix and match multiple devices, up to a total power budget of 120 watts. A PoE+ switch opens the door for you to add downstream node controllers, saving on network cabling. Increase your internet bandwidth with more WiFi Access Points. Operate modern PTZ security camera systems, and more. Versatile, high-speed unmanaged switch includes dual gigabit LAN uplink ports for redundancy. A simple toggle switch allows you to separate each port with its own VLAN, or extend the PoE range to over 800 feet.