Only need to connect the monitor power wire with car electronics sytem: Red and yellow wire to car Positive/Live, Black wire to GND, Green wire to reversing gear Trigger+ (or No need to connect) 7 Inch AHD 1080P
Screen MonitorDisplay Size: 7
Inch AHD DVR ScreenPower requirement: DC
12V-24VConsumption:
8WVideo: 2 channelS input, Split Screen DisplayOur Split monitor can display two video at the same time, you can also swicth to AHD 1 or AHD 2 by "CH" buttonBuild in SD DVR Recording functions (SD card not include) Grid Lines Can be turn on or offPlease set it with the monitor system "General Settings" Car ACC Line on, and connect the green cable with reversing trigger+AHD 2 will show with Grid Lines if you set "ACC line on" reversing parking backup view priorityYou can Set the camera for Mirror or none mirror by "General
Settings"Net Weight: Approx.
1000gLauguage: English, Russian, ChineseAHD 1080P Car Rear View Camera100% Not Wash Out CCD Sensor Mirror image without
Grid LinesTV system: PAL/NTSC
Lens: 2.1 mm (170 View angle )
Number of pixels: 2
Megapixel CameraMinimum illumination: 0 LUX
Backlight compensation: AutoWhite
Balance: Auto TracingAuto
Gain Control: AutomaticNight
vision: YesVideo
Output: 4Pin
Connectorwork Temperature: -20C~+60CPower
Requirement: DC
12V-24VWeight: Approx
200gWaterproof: IP
69Packaging include: 1 x 4Pin 7" AHD Rear view Monitor1 x Dashboard Bracket1 x Remote controller1 x Monitor Power Video Harness Cable1 x 4Pin 8 LED AHD Rear View Camera1 x 4Pin 15M/49ft Cable1 x Manual