Rembam ELP-LP54 Projector Replacement Compatible Lamp with Housing for Epson EB-S7 EB-S7+ EB-S72 EB-S8 EB-S82 EB-W7 EB-W8 EB-X7 EB-X7+ EB-X72 EB-X8 EB-X8e EH-TW450

Rembam Information: Rembam has own factory and many experienced workers. Every lamp will be take strict quality test before leaving factory. So you don't need to doubt the quality.

Specifications

:
Application:
Business/Education/Home/SchoolCompatible: for Epson EB-S7 Epson EB-S7+ Epson EB-S72 Epson EB-S8 Epson EB-S82 Epson EB-W7 Epson EB-W8 Epson EB-X7 Epson EB-X7+ Epson EB-X72 Epson EB-X8 Epson EB-X8e Epson EH-TW450 Epson EX31 Epson EX51 Epson EX71 Epson Powerlite HC 705HD
Epson EB-S8LAMP Epson H309APackage: 1 bulb with housing1
Instructions sheetInstallation: 1. Turn off the projector and unplug the power cord. 2. Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3. Loosen the lamp cover screw. Then slide the lamp cover off. 4. Loosen the two screws holding the lamp in place. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. Then tighten its screws. 7. Replace the lamp cover, then tighten its screw.
Notes: 1. To avoid burns, allow the projector to cool for at least 60 minutes before replacing the lamp. 2. We provide excellent refund service with no any contidition with 12 hours feedback. If you have any questions, please contact us. We will try our best to sole your problem as soon as possible.