Your Browsing History
Meet Your Seller
KAIWEIDI BHL-5010-S Replacement Projector Lamp for JVC DLA-HD990 DLA-HD950 DLA-HD750 DLA-RS35 DLA-RS25 DLA-HD550 DLA-HD350 DLA-HD250 DLA-RS20 DLA-RS15 DLA-RS10 Projector Bulb
- Compatible Models:for JVC DLA-HD250 DLA-HD350 DLA-HD550 DLA-HD750 DLA-HD950 DLA-HD990 DLA-RS10 DLA-RS15 DLA-RS20 DLA-RS25 DLA-RS35.
- The bulb is equipped with A+ quality wick, which has the same durability and brightness as the original lamp.
- Lifetime is 3500 hours under normal conditions and 4500 hours in ECO mode, while outputting 1000 lumens of brightness.
- Don't worry when you receive a faulty product. We offer 200 days technical support.
- All lamps are tested before leaving the factory. Once the product is faulty, please contact our team, we will reply within 12 hours and provide you with a satisfactory solution.
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Brand name: KAIWEIDI
Part number: for
BHL-5010-SWattage: 220
W LampPackage: 1*bulb
with housingType: Bare Lamp with housingAverage
Life (hrs): 3500~4500 hoursCompatible
Models: Fit for JVC DLA-HD250 DLA-HD350 DLA-HD550 DLA-HD750 DLA-HD950 DLA-HD990 DLA-RS10 DLA-RS15 DLA-RS20 DLA-RS25 DLA-RS35 ProjectorsOperation to extend lamp life: - Use for no more than four hours at a time. - After turning off the projector, wait at least 60 minutes until the projector cools down before restarting. - Clean the dust inside the projector and around the lamp and replace the filter regularly. Failure to do so will cause the projector to overheat and shut down automatically. - Do not disconnect the power directly while the projector is running.
Part number: for
BHL-5010-SWattage: 220
W LampPackage: 1*bulb
with housingType: Bare Lamp with housingAverage
Life (hrs): 3500~4500 hoursCompatible
Models: Fit for JVC DLA-HD250 DLA-HD350 DLA-HD550 DLA-HD750 DLA-HD950 DLA-HD990 DLA-RS10 DLA-RS15 DLA-RS20 DLA-RS25 DLA-RS35 ProjectorsOperation to extend lamp life: - Use for no more than four hours at a time. - After turning off the projector, wait at least 60 minutes until the projector cools down before restarting. - Clean the dust inside the projector and around the lamp and replace the filter regularly. Failure to do so will cause the projector to overheat and shut down automatically. - Do not disconnect the power directly while the projector is running.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ApexDash Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...










