Note: 1. This product power from POE, need to connect with a 802.3 af Standard 48V POE Switch. 2. This camera default 3MP & H. 265, if your NVR do not support 3MP or H. 265, you can change our camera into 1080P (2MP) and H. 264. * High Resolution 3.0 Megapixel 1/3'' CMOS Sensor* 2304*1296P resolution 20fps* 18pcs 940nm Invisible LED IR Night Vision* Support POE, reduce the trouble of cable arrangement. * Have auxiliary power connector, can use like a Non-POE IP camera. * Support H. 265 encode, compare with H. 264, transit same quality image only need half of the bandwidth; Record same quality image only need half of the storage; * Also support H. 264 encode, so it can be compatible with both H. 264 and H. 265 device. * Support iPhone, Android smartphone* P2P Remote Viewing* Support Motion detection, Email Alarm function* Support Multi-Language* Day & Night vision* ABS Plastic Material Shell* Simple Operation and Easy to
UseCameraModel: IPIR-M-POE-FHW
Resolution: 2304 x 1296P 3.0
Mega PixelsSensor: FH8852+GC2053Min
illumination: 0.1L ux @(F 1.2, AGC ON), 0 Lux with
IRLens: 3.7 mmO nviif
Port: 6688Lens
interface type:
M12Shutter: 1/25 seconds -1/100, 000 secondsCompression
Format: H. 265 / H.
264Frame rate:
20fpsStorage: NVR or
ComputerIP address: Dynamic
(Default) /StaticSmart alarm: Motion detection,
Email alarmSupport protocol: O NVIIF, HTTP, TCP/IP, ICMP, RTSP, RTP, RTCP, SMTP, DHCP, DNS, PPPoE, NTP
Ethernet: 10M/100M mbps
Ethernet (RJ-45)GeneralOperating Temperature: -25C~60COperating
Humidity: 10%~90%Power
Supply: POEPOE
Standard: 802.3 afInfrared
Lamp: 18 LED
Night Vision Distance: 5-10mDimension
(cm): 10.2 cm x 6cm x 2.7 cmWeight: 0.2
kgPackage contents: 1 x Camera1 x User Manual (English) 1 x Screws Set