Skip to main content
  • $99.99
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    Meshnology W15 LoRa End Device, ESP32-S3 LR2021 Chip 3000mAh Battery, 1PCS

    • READY-TO-USE OUT OF THE BOXPRE-ASSEMBLED LORA END DEVICE: The W15 arrives as a completed wireless terminal with the main hardware installed in a protective enclosure, plus a 915MHz antenna and SH1.25-4P connection cable. No soldering or board-level assembly is needed, so you can connect power, load your firmware, and start developing your IoT prototype or embedded project faster.
    • ESP32-S3R8 PROCESSING WITH LR2021 LORA RADIO: Built with a 240MHz dual-core ESP32-S3R8 controller, 8MB PSRAM, and 8MB SPI Flash, the W15 provides a capable platform for ESP32 LoRa projects. The Semtech LR2021 radio supports Sub-GHz and 2.4GHz dual-band LoRa development.
    • DUAL-BAND LORA, WI-FI, AND BLUETOOTH 5.0 BLE: Use the included 915MHz antenna for Sub-GHz projects, or use 2.4GHz Wi-Fi and Bluetooth 5.0 BLE for local setup and data exchange. Communication range depends on firmware, antenna placement, terrain, and operating conditions.
    • DUAL USB-C AND EXPANSION-READY CONTROL: Two USB Type-C por
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    READY-TO-USE OUT OF THE BOXPRE-ASSEMBLED LORA END DEVICE: The W15 arrives as a completed wireless terminal with the main hardware installed in a protective enclosure, plus a 915MHz antenna and SH 1.25 -4P connection cable. No soldering or board-level assembly is needed, so you can connect power, load your firmware, and start developing your IoT prototype or embedded project faster. ^^ ESP32-S3R8 PROCESSING WITH LR2021 LORA RADIO: Built with a 240MHz dual-core ESP32-S3R8 controller, 8MB PSRAM, and 8MB SPI Flash, the W15 provides a capable platform for ESP32 LoRa projects. The Semtech LR2021 radio supports Sub-GHz and 2.4GH z dual-band LoRa development. ^^ DUAL-BAND LORA, WI-FI, AND BLUETOOTH 5.0
    BLE: Use the included 915MHz antenna for Sub-GHz projects, or use 2.4GH z Wi-Fi and Bluetooth 5.0 BLE for local setup and data exchange. Communication range depends on firmware, antenna placement, terrain, and operating conditions. ^^
    DUAL USB-C AND EXPANSION-READY CONTROL: Two USB Type-C ports support power, firmware loading, and serial debugging. BOOT, RST, a programmable LED, and reusable GPIO make the W15 practical for Ar duino IDE, ESP-IDF, MicroPython, PlatformIO, and RT-Thread development. ^^ 1PCS
    KIT FOR CONNECTED PROJECTS: Includes 1 W15 pre-assembled end device, 1 915MHz antenna, 1 SH 1.25 -4P connection cable, and 1 protective package. Application firmware, battery, and network service are not included unless stated in the selected offer.
    ^^ Friendly reminder: You can obtain the firmware from the Meshnology Wiki website. If you are unsure how to proceed, please contact us using the details provided on the site; our expert engineers are ready to assist you.

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: non-replaceable
    • This item is covered by Aptly Tech Return Policy

    Manufacturer Contact Info

    LOADING...