Arducam Day and Night Vision IMX477 HQ Camera for Jetson Nano/Xavier NX, 12MP Automatic IR-Cut Switching for All-Day Image

This Arducam module uses the same 12MP IMX477 image sensor as the Raspberry Pi High Quality Camera, but offers a mechanical IR cut-off filter switched automatically based on light condition. The official RPi HQ camera is not sensitive to infrared, and there won't be a NoIR version. On the contrary, this Arducam camera module not only offers sensitivity to infrared but also keeps the natural feeling during daylight. It's fully compatible with Jetson Nano/Xavier NX with a camera connector.
SPECIFICATION Camera - Sensor: IMX477 -
Optical Format: 1/ 2.3 '' (diagonal 7.857 mm) -
Resolution: 4056 (H) x 3040 (V) 12.3MP -
Pixel Size: 1.55 um x 1.55 um -
IR Sensitivity: Switchable IR-CUT filter -
Interface: 4-lane MIPI CSI-2 -
Lens Mount: CS-Mount -
Frame Rate: (depends on the target platform, maximum fps limit might apply) Full resolution@60fps (normal), 4K2K@60fps, 1080p@240fps Full resolution@40fps (12bit normal) Full resolution@30fps (DOL-HDR, 2 frames)
Lens - Format: 1/ 2.3 inch -
Focal Length: 6mm -
Aperture (F): Max. F 1.2 - Field of
View (FOV): 65deg (H) -
Mount: CS-Mount -
Back Focal Length: 7.53 mm -
MOD: 0.2 m -
Dimension: Ph30x31mm -
Weight: 53g Camera board -
Board Size: 38mmx38mm -
Hole Pitch: Compatible with 29mm, 30mm, 34mm KERNEL CAMERA DRIVER USED This camera relies on kernel drivers to work - one kernel version, one camera driver. - Versions earlier than JetPack 4.3 (L4T 32.3. 1) are not supported. - Up or downgrading your OS leads to a kernel bump, and you'll need to re-install a matching driver. - Future JetPack/kernel updates require future drivers. When that happens, please allow us some time to process and if you don't see it released in time, kindly remind US.