Your Browsing History
- Free 30-day Returns
$249.99
Meet Your Seller
Yyiikee Duplex DMR D-Star YSF Hotspot Ethernet WiFi Voice Modem Support UHF VHF Fusion Antenna Raspbery P Model 2B Two Colors OLED 2 TimeSlots
- MMDVM hotspot supports D-STAR DMR YSF P25 NXDN POCSAG, enables the different mode of digital two way radio to communicate with each other (YSF2DMR / YSF2NXDN / YSF2P25 / DMR2YSF / DMR2NXDN)
- Two Time Slots: Support receive in one Frequency and transfer in another frequency using Duplex mode
- Upgraded Network: support wifi wireless connection and wired connection to the router directly.
- Power Supply: 5V, Mobile charger or a USB cable connected to your computer or laptop.
- Best customer services: fully-assembled. The firmware is pre-loaded. Contact us if any question, we will reply within 6 hours. 73
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
First time to use, Suggest to Connect the hotspot to the router by a network cable directly. So you do no need to set the wifi.
All you need to set are:
1) callsign
2) dmr id
3) BM hotspot security
Support: DMR, YSF, D-STAR, P25,
Support: Duplex mode, Simplex mode.
WIFI SSID: Need the 2.4GH z SSID as the Pi Zero W doesn't support 5.8GH z
Software: Pi-Star
Power supply: Mobile charger or a USB cable connected to your computer or laptop.
The Hotspot will also work mobile in your vehicle if you connect it to your mobile phone network.
Shell: Acrylic Shell, See clearly.
Antenna: 2 antennas for UHF
LEDs: on board leds to show status, with status words on shell,
Screen: Two Colors Oled, Yellow and Blue.
Note: All designs will be contributed on MMDVM open source project.
Package lists:
1. Duplex Hotspot x1 (With Raspbery P Model 2B assembled)
2. OLED display x1 (installed on board)
3. 8G TFT card x1
4. Wireless wifi module x1
5. Acrylic Shell x1 (assembled)
6. 433Mhz UHF Antenna x2
7. Usb Cable x1
8. User Manual
All you need to set are:
1) callsign
2) dmr id
3) BM hotspot security
Support: DMR, YSF, D-STAR, P25,
Support: Duplex mode, Simplex mode.
WIFI SSID: Need the 2.4GH z SSID as the Pi Zero W doesn't support 5.8GH z
Software: Pi-Star
Power supply: Mobile charger or a USB cable connected to your computer or laptop.
The Hotspot will also work mobile in your vehicle if you connect it to your mobile phone network.
Shell: Acrylic Shell, See clearly.
Antenna: 2 antennas for UHF
LEDs: on board leds to show status, with status words on shell,
Screen: Two Colors Oled, Yellow and Blue.
Note: All designs will be contributed on MMDVM open source project.
Package lists:
1. Duplex Hotspot x1 (With Raspbery P Model 2B assembled)
2. OLED display x1 (installed on board)
3. 8G TFT card x1
4. Wireless wifi module x1
5. Acrylic Shell x1 (assembled)
6. 433Mhz UHF Antenna x2
7. Usb Cable x1
8. User Manual
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by DSKL Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...