Your Browsing History
Meet Your Seller
4Pcs Atmega32U4 Type-C Pro Micro 5V 16MHz Module Board Programming USB C Development Board Micro Controller for Arduino IDE
- ATMega 32U4 AU operating at 16MHz and 5V, TYPE-C interface,supported under IDE v1.0.1
- ATmega32U4 boasting 4 x 10-bit ADC pins channels, 5 PWM pins, 12 digital I/O pins, and hardware serial connections Rx and Tx, if providing the board with unregulated power, connect to the "RAW" pin rather than VCC
- Microcontroller ATmega32U4 chip equipped with a built-in USB transceiver, allowing seamless USB connectivity right on the board, on-board micro-USB connector for programming
- Seamlessly integrate the Pro Micro into your projects by selecting the for "Arduino Leo nardo" board in the Tools menu of the for Arduino IDE software, with a voltage range of 5 to 9V, this versatile board offers flexibility in power options for your convenience
- Atmega32U4 type-C USB development with the pro micro board module this board opens up a world of possibilities for your creative projects
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
ATmega32U4 USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface4 channels of 10-bit ADC5 PWM pins12 DIOs as well as hardware serial connections Rx and TxRunning at 16MHz and 5V, this board will remind you a lot of your other favorite compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.
Supported under IDE v 1.0.
1How to use: 1. Connected to computer. (If this module cannot be recognized by your computer, please install the driver first)2. Opened IDE and loaded Blink sketch. 3. Set board to Leonardo and selected the appropriate COM port (It showed up in the list already identified as a Leonardo). 4. Connected an LED to pin 9 and modified the sketch accordingly. 5. Hit upload and within a few seconds having a blinking LED.
Package includes: 4 x Pro micro ATmega32U4 5V 16MHz module
Supported under IDE v 1.0.
1How to use: 1. Connected to computer. (If this module cannot be recognized by your computer, please install the driver first)2. Opened IDE and loaded Blink sketch. 3. Set board to Leonardo and selected the appropriate COM port (It showed up in the list already identified as a Leonardo). 4. Connected an LED to pin 9 and modified the sketch accordingly. 5. Hit upload and within a few seconds having a blinking LED.
Package includes: 4 x Pro micro ATmega32U4 5V 16MHz module
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ApexDash Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...