AOOSTAR ED02 M.2 SSD Enclosure, NVMe & SATA USB 3.2 Gen 2 10Gbps External SSD Case, Smart Display, Aluminum M.2 Enclosure for 2230/2242/2260/2280, Up to 8TB

Dual Protocol Auto Recognition AOOSTAR ED02 M. 2 SSD enclosure supports both M. 2 NVMe and M. 2 SATA SSDs with automatic protocol recognition. Unlike NVMe-only enclosures, ED02 is designed for users who may have different types of M. 2 drives, including SSDs removed from older laptops or drives with an uncertain protocol. Supports standard M. 2 2230/2242/2260/2280 sizes and up to 8TB per SSD. ^^ Smart Real-Time Digital Display The built-in smart display provides more than a simple activity indicator, showing real-time USB connection status, detected drive capacity, operating time, drive health, current temperature, USB voltage and power-on count.

When the drive health falls below 100%, the health indicator flashes as a reminder to back up data and check the SSD. The display automatically turns off after 15 minutes without data activity and resumes when data transfer starts. ^^ 10Gbps High Speed & Wide CompatibilityAOOSTAR ED02 uses a USB 3.2 Gen 2 Type-C port and RTL9210 controller for fast external storage. With a high-performance NVMe SSD, a USB 3.2 Gen 2 host port and the included C-to-C cable, it delivers up to 10Gbps of bandwidth. M. 2 SATA drives are limited by the SATA interface itself, so their speed will be lower than NVMe drives.

Works with Windows 10/11 and macOS, and also connects through USB4 or Thunderbolt ports while staying within the 10Gbps limit of this enclosure. ^^ Efficient Aluminum Passive Cooling System ED02 combines an aluminum alloy enclosure with three included thermal silicone pads to transfer heat from the M. 2 SSD to the outer shell for fanless passive cooling. In internal NVMe testing, the SSD temperature was reduced from 54C without the thermal pad to 42C with the thermal pad properly installed. The included thermal pad must be installed securely according to the instructions for proper heat transfer.

^^ Clear SSD Compatibility & Installation RequirementsED02 supports M. 2 NVMe (M Key) and M. 2 SATA (B Key / B+M Key) SSDs in 2230/2242/2260/2280 formats, total thickness under 3.5 mm. Not compatible with 2.5 -inch SATA drives, mSATA, M. 2 SSDs 3.5 mm or thicker, or drives with built-in heatsinks. A new blank SSD must be initialized and formatted first. Package includes C-to-C and A-to-C cables, 3 thermal pads, mounting hardware, screwdriver and manual. M. 2 SSD not included.
^^ **NOTE BEFORE USE**: This product includes a heatsink and has been extensively tested for reliable temperature control. The protective film on the display may be peeled off before use. For abnormal temperature readings, check real SSD temperature with diskmonitoring software. Reinstall the SSD for inaccurate data reads; improper mounting is a common cause. Compatible with mainstream SSD models. Firmware updates are available upon request for nichebrand SSDs.