Skip to main content
  • $112.99
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    K&F Concept Lens Mount Adapter for Leica M Mount Lens to Nikon Z6 Z7 Camera

    • Smooth surface for effortless mount, Made of copper.
    • This adapter allows you to use Leica M Mount Lens lens to Nikon Z6 Z7 mount camera body.
    • Full manual operation, manual focus, infinity focus allowed.
    • Red dot identification, precise alignment, easy to install and disassemble.
    • If your camera indicated "lens is not properly installed", please modify the camera menu settings. Usually called the release the shutter the lens is not installed", you can modify the settings to allow. Specifically refer to the camera manual.
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    Features: Allows focus infinityElegant clear appearanceCompact and high quality metal materialHigh Precise to ensure the perfect fitDiaphragm control of the lens is set manuallyInstructions for use:
    Attention: 1. Manual adapter without autofocus or aperture ring. 2. Skillful installation, don't too much force. 3. Adapting an APS-frame lens to a full-frame camera may generate vignetting, some cameras could correct it by adjusting APSC. 4. Adapting a full-frame lens to an APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on
    M4/3 cameraInfinity focus position: The position of the infinity mark [] of the telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity. No Lens Attached' - Warning
    Message Appears: 1. If your camera indicates "lens is not properly installed", please
    modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will be maximum aperture by default. If you want to adjust the aperture but without manual control ring, then you need to remove the adapter ring and adjust the aperture on the camera. 2. Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...