Your Browsing History
Meet Your Seller
Bandless Case Compatible with MacBook Pro 13 inch 2020 2019 2018 2017 2016 Release A2338(M1) A2251 A2289 A2159 A1989 A1706 A1708, Plastic Hard Case Shell Cover & Keyboard Skin Cover - Flower
- Compatibility: The case is designed to be compatible with MacBook Pro 13 Inch model A2338 (with M1 Chips) A2251 A2289 A2159 A1989 A1708 A1706 with/without Touch Bar,2020 2019 2018 2017 2016 Release). Please kindly check the model number ''Axxxx'' on the bottom of the laptop before your purchase.
- Slim & Precise Design: Lightweight design, will not bring any weight to your MacBook,Case Design lets you Open/Close your MacBook all the way and Access to all buttons and features.
- Non-slip & Fully vented:4 anti-slip rubber feet Protect your MacBook from sliding.Bottom shell case cover vented for maximum heat dissipation and disbursement.The keyboard cover protects your keyboard gainst spills and contaminates.
- DIMENSION:compatible with MacBook Pro 13 inch 2016-2020 version Laptop Dimension:11.97 x 8.36 x 0.59 inch. Case dimension: 12 x 8.5 x 0.6 inch.
- Quality customer service: If you have any questions about our products when you purchase, you can consult our customer ser
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Protective Hard Shell Case Cover Compatible with MacBook Pro 13 inch with/without Touch bar 2020 2019 2018 2017 2016 Model A2338 M1 A2289 A2251 A2159 A1989 A1706 A1708
How to confirm the EXACT MODEL of your Macbook?
1) Turn your MacBook over.
2)The model number is located on the bottom of your MacBook, in small prints which says "Model: AXXXX". "XXXX" are numerical numbers.
Case NOT Compatible with:
x Macbook Pro 13 retina A1502/A1425
x MacBook Pro 13 with CD-ROM A1278
x MaBook Air 13-inch
x Macbook Air 11"
x Macbook 12"
x Macbook Pro 15"
x Macbook Pro 16"
Features:
1) Sturdy: Made of high quality lightweight plastic, hard case protects your MacBook from scratches, dust and dirt.
2) Easily Install and Take Apart: 2 piece snap-on design, this case can be install and taken off easily.
3) Precise Design: The lightweight design allows access to all buttons and features, allowing you to open/close the MacBook unimpeded.
4) Safe Heat Dissipation: The bottom part matches the vent slots of MacBook perfectly, which is for safe heat dissipation.
5) Various Colours: Several stylish and classical colour for choosing. The case adds not only protection but also an elegant appearance to your MacBook.
Installation
1. Please find the 4 clips for top cover and 4 cilps for bottom cover.
2. Please attach the bottom cover at the hinge location first, there are 2 clips to secure the back side of bottom cover.
3. Gently push down the 2 side clips of bottom cover.
4. To install the top cover, please attache the top cover at the hinge location first.
5. Then gentley force to snap on the rest clips.
* Please contact Customer Service by email if you have any problems with the product before or after ordering.
How to confirm the EXACT MODEL of your Macbook?
1) Turn your MacBook over.
2)The model number is located on the bottom of your MacBook, in small prints which says "Model: AXXXX". "XXXX" are numerical numbers.
Case NOT Compatible with:
x Macbook Pro 13 retina A1502/A1425
x MacBook Pro 13 with CD-ROM A1278
x MaBook Air 13-inch
x Macbook Air 11"
x Macbook 12"
x Macbook Pro 15"
x Macbook Pro 16"
Features:
1) Sturdy: Made of high quality lightweight plastic, hard case protects your MacBook from scratches, dust and dirt.
2) Easily Install and Take Apart: 2 piece snap-on design, this case can be install and taken off easily.
3) Precise Design: The lightweight design allows access to all buttons and features, allowing you to open/close the MacBook unimpeded.
4) Safe Heat Dissipation: The bottom part matches the vent slots of MacBook perfectly, which is for safe heat dissipation.
5) Various Colours: Several stylish and classical colour for choosing. The case adds not only protection but also an elegant appearance to your MacBook.
Installation
1. Please find the 4 clips for top cover and 4 cilps for bottom cover.
2. Please attach the bottom cover at the hinge location first, there are 2 clips to secure the back side of bottom cover.
3. Gently push down the 2 side clips of bottom cover.
4. To install the top cover, please attache the top cover at the hinge location first.
5. Then gentley force to snap on the rest clips.
* Please contact Customer Service by email if you have any problems with the product before or after ordering.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by StarDragon Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...