Note:
1. This product power from POE, need to connect with a 802.3 af Standard 48V POE Switch.
2. This camera default 3MP & H. 265, if your NVR do not support 3MP or H. 265, you can change our camera into 1080P (2MP) and H. 264.
* High Resolution 3.0 Megapixel 1/3'' CMOS Sensor
* 2304*1296P resolution 20fps
* 18pcs 940nm Invisible LED IR Night Vision
* Support POE, reduce the trouble of cable arrangement.
* Have auxiliary power connector, can use like a Non-POE IP camera.
* Support H. 265 encode, compare with H. 264, transit same quality image only need half of the bandwidth; Record same quality image only need half of the storage;
* Also support H. 264 encode, so it can be compatible with both H. 264 and H. 265 device.
* Support iPhone, Android smartphone
* P2P Remote Viewing
* Support Motion detection, Email Alarm function
* Support Multi-Language
* Day & Night vision
* ABS Plastic Material Shell
* Simple Operation and Easy to Use
Camera
Model: IPIR-M-POE-FHW
Resolution: 2304 x 1296P 3.0 Mega Pixels
Sensor: FH8852+GC2053
Min illumination: 0.1L ux @(F 1.2, AGC ON), 0 Lux with IR
Lens: 3.7 mm
O nviif Port: 6688
Lens interface type: M12
Shutter: 1/25 seconds -1/100, 000 seconds
Compression Format: H. 265 / H. 264
Frame rate: 20fps
Storage: NVR or Computer
IP address: Dynamic (Default) /Static
Smart alarm: Motion detection, Email alarm
Support protocol: O NVIIF, HTTP, TCP/IP, ICMP, RTSP, RTP, RTCP, SMTP, DHCP, DNS, PPPoE, NTP
Ethernet: 10M/100M mbps Ethernet (RJ-45)
General
Operating Temperature: -25degC~60degC
Operating Humidity: 10%~90%
Power Supply: POE
POE Standard: 802.3 af
Infrared Lamp: 18 LED
Night Vision Distance: 5-10m
Dimension (cm): 10.2 cm x 6cm x 2.7 cm
Weight: 0.2 kg
Package contents:
1 x Camera
1 x User Manual (English)
1 x Screws Set