The TPSW5GVERSA Power over Ethernet PoE 5 Port Gigabit switch offered by Tycon is a fully automatic high speed Layer 2 Ethernet switches with multiple function ports Port 1 is a 60W 4pair High PoE port Port 234 are 48V 30W 8023at compatible ports Port 5 is a 24V 12W Passive PoE port This allows a customer to power up multiple PoE devices with different power requirements The switch requires a 4856VDC 4A power input The units are compatible with Category 5 or higher Ethernet cables The RJ45 connectors are shielded and grounded to the common FG Frame Ground connection The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection They have a wide operating temperature range for outdoor and industrial applications A 4A power supply is recommended like the PSDIN48240W Features.
One 60W High PoE Three 30W 8023at PoE and one 12W 24V Passive PoE port. Gigabit Compatible. Builtin Surge Protection. Automatic MDIMDIX Crossover. Automatic Speed and Duplex Sensing. Low Self Power and High Temperature Operation. DIN Rail Adapters included. ITE Power Supply UL Listed. Power different devices from a single 48V supply. Cameras and Wireless RadiosSpecifications. Transmission Speed 1000 Mbps Gigabit 100 Mbps 10 Mbps Autonegotiation. Connections Shielded RJ45 Grounded to FG connection. Input Vin 44VDC to 57VDC on Wire Terminal. PoE Protections Over Temperature Over Current Short Circuit.
Surge Protection IEC6100042 ESD 15kV air 8kV contact. Self Consumption 3 Watt Typical. Switch Technology Store and Forward. Protocol CSMACD. Flow Control IEEE8023xfullduplex Back Pressurehalfduplex. Data Transmission Rate 1488000pps 148800pps 14880pps. Address Table 1K MAC selflearning. Operating Temp 30 to 70C 22 to 158F. Operating Humidity RH 5 90 non condensing. Storage Temperature 40 to 85C 40 to 185F. Weight 095 lbs