Your Browsing History
- Free 30-day Returns
$258.99
Meet Your Seller
PRV AUDIO 8 Inch Midbass Speaker 8MB700FT-NDY 8 Ohm Neodymium Loudspeaker with 700 Watts RMS Power, Pro Audio High Excursion Neo Mid Bass Speaker (Single)
- 8 PRO Audio Midbass loudspeaker designed for Low Frequencies at High Power 8 Ohm To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
- The 8MB700FT-NDY is an extremely efficient 8 mid bass from PRV Audio. This driver is perfect for mating to compression drivers due to its wide frequency bandwidth and its high 98 dB sensitivity rating, on 3 way system (with a suggested 95 Hz, 12 dB/octave high pass filter in place).
- This midbass will stand up to years of serious professional use! Thanks to its special composed spider reduces distortion at a high excursion and double roll surround keep cone travel linear at high excursion.
- The large 2.5 voice coil allows for the high 700 Watts RMS, and warrants the outstanding cooling system implemented into the motor. Its powerful neodymium motor is vented to provide excellent cooling.
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
PRV Audios 8MB700FT-NDY Forte Series was specially tailored to give you more power handling and less distortion. The larger voice coil ensures high heat dissipation and the necessary Bl to deliver high sensitivity even at high power with the minimum distortion. The lower Qts allows more precise midbass. Superior fidelity is achieved through a perfect combination of a non-pressed cone with a smooth frequency response and its well ventilated magnet motor specially designed to allow high displacement without increasing distortion. To get superior fidelity, the special composite cone is built with non-pressed paper for reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.
The 8MB700FT-NDY is an extremely efficient 8 midbass, due to its wide frequency band and 98 dB sensitivity rating, this speaker is ideal for pairing with compression drivers, on 3-Way system (with a suggested 95 Hz, 12 dB/octave high pass filter in place)! The large 2.5 voice coil allows for the high 700 watts power handling and warrants the outstanding cooling system implemented into the motor. Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability. GENERAL SPECIFICATIONS
Nominal Diameter: 8 (203 mm)
Nominal impedance: 8 OhmNominal
Power Handling: 350 WattsContinuous Program
Power (RMS): 700 WattsMax
Peak Power: 1400
WattsSensitivity 2.83V at 1m: 98 dBRecommended Hi Pass Crossover For Full Power Handling95 Hz 12db Per Octave CrossoverFrequency Response at -10dB: 70 5, 600
HzVoice Coil Diameter: 2.5 (63 mm)
Voice Coil Wire: CCAW
Voice Coil Winding Depth: 11.3 mmFormer
Material: Fiber
GlassMagnetic Gap Depth: 8.00 mmFrame
Material: Die Cast Aluminum
The 8MB700FT-NDY is an extremely efficient 8 midbass, due to its wide frequency band and 98 dB sensitivity rating, this speaker is ideal for pairing with compression drivers, on 3-Way system (with a suggested 95 Hz, 12 dB/octave high pass filter in place)! The large 2.5 voice coil allows for the high 700 watts power handling and warrants the outstanding cooling system implemented into the motor. Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability. GENERAL SPECIFICATIONS
Nominal Diameter: 8 (203 mm)
Nominal impedance: 8 OhmNominal
Power Handling: 350 WattsContinuous Program
Power (RMS): 700 WattsMax
Peak Power: 1400
WattsSensitivity 2.83V at 1m: 98 dBRecommended Hi Pass Crossover For Full Power Handling95 Hz 12db Per Octave CrossoverFrequency Response at -10dB: 70 5, 600
HzVoice Coil Diameter: 2.5 (63 mm)
Voice Coil Wire: CCAW
Voice Coil Winding Depth: 11.3 mmFormer
Material: Fiber
GlassMagnetic Gap Depth: 8.00 mmFrame
Material: Die Cast Aluminum
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by FortressTek Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...











