Your Browsing History
Meet Your Seller
AITRIP 2Sets PN532 V2.0 NFC RFID Wireless Module V3 User Kits Reader Writer Mode IC S50 Card PCB Attenna I2C IIC SPI HSU Type C Interface for Arduino Raspberry Pi
- Supply Voltage: 3.3V to 5.5 V; Model Number: NFC Card Reader Module; Type C Interface
- With NFC library support for Arduino and Raspberry Pi, this contactless communication module facilitates the development of NFC-enabled products. Utilize the capabilities for Arduino and for Raspberry Pi platforms to easily integrate NFC functionality into your projects.
- support for cards: IC access card, IC lift card, electric car NFC card
- Based on PN532 Chip: Built with the PN532 chip, this near field communication reader ensures reliable and efficient 13.56MHz NFC communication. It features an onboard antenna, eliminating the need for external antenna coils. The module is compatible with SPI, I2C, and UART interfaces for seamless communication.
- Support SPI, I2C and UART interface selection switching
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Specification:
Supply Voltage: 3.3V to 5.5 V
Model Number: NFC Card Reader Module
Operating Voltage: 3.3V
Maximum working current: 150mA
Operating current (standby mode): 100mA
Operating current (card writing mode): 120mA
Operating current (card reading mode): 120mA
Size: 78x48x12mm/ 3.07 x 1.89 x 0.47 inch
1. Based on PN532 chip for 13.56MH z near field communication.
2. The module is equipped with an on-board antenna, no external antenna coil is required, and the module is compatible with SPI, I2C, and UART interfaces for communication.
3. With the NFC library supporting Arduino and Raspberry Pi, it can be easily used for the development of NFC-enabled products.
4. Support SPI, I2C and UART interface selection switching
5. Effective communication distance within 5cm
6. Can be used for 13.56MH z contactless communication.
7. Compatible with ISO14443 Type A and Type B standards
Special Tips:
1. If there is a phenomenon that the programme can be compiled but cannot be uploaded successfully: to rule out the failure of the development board, you can first upload the programme to the development board successfully, then connect the card reader module and press the button.
Then connect the card reader module, press reset, and then continue debugging.
2. The toggle switch settings are different for different communication modes. Remember.
Package: 2 sets
Supply Voltage: 3.3V to 5.5 V
Model Number: NFC Card Reader Module
Operating Voltage: 3.3V
Maximum working current: 150mA
Operating current (standby mode): 100mA
Operating current (card writing mode): 120mA
Operating current (card reading mode): 120mA
Size: 78x48x12mm/ 3.07 x 1.89 x 0.47 inch
1. Based on PN532 chip for 13.56MH z near field communication.
2. The module is equipped with an on-board antenna, no external antenna coil is required, and the module is compatible with SPI, I2C, and UART interfaces for communication.
3. With the NFC library supporting Arduino and Raspberry Pi, it can be easily used for the development of NFC-enabled products.
4. Support SPI, I2C and UART interface selection switching
5. Effective communication distance within 5cm
6. Can be used for 13.56MH z contactless communication.
7. Compatible with ISO14443 Type A and Type B standards
Special Tips:
1. If there is a phenomenon that the programme can be compiled but cannot be uploaded successfully: to rule out the failure of the development board, you can first upload the programme to the development board successfully, then connect the card reader module and press the button.
Then connect the card reader module, press reset, and then continue debugging.
2. The toggle switch settings are different for different communication modes. Remember.
Package: 2 sets
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by kaipuda Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...