Stanlamp Information: Stanlamp has own factory and many experienced workers. Every lamp will be take strict quality test before leaving factory. So you don't need to doubt the quality.
Specifications
: Part
number: ELP49
V13H010L49Application:
Business/Education/Home/SchoolCompatible: for Cinema 8350 8345 8500UB 8700UB 6100 6500UB 8100 7100 7500UB 9100 9350 9500UB 9700UB TW2800 TW2900 TW3000 TW3200 TW3500 TW3600 TW3800 TW4000 TW4400 TW4500 TW5000 TW5500 TW5800 TW8500 H291A H292A H337A H373B H700 Projector V13h010l49/Elplp49 Replacement Projector
Lamp BulbPackage: 1 bulb with housing1
Instructions sheetInstallation: 1. Turn off the projector and unplug the power cord. 2. Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3. Loosen the lamp cover screw. Then slide the lamp cover off. 4. Loosen the two screws holding the lamp in place. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. Then tighten its screws. 7. Replace the lamp cover, then tighten its screw.
Notes: 1. To avoid burns, allow the projector to cool for at least 60 minutes before replacing the lamp. 2. We provide excellent re fund service with no any contidition with 12 hours feedback. If you have any questions, please contact us. We will try our best to sole your problem as soon as possible.