Your Browsing History
Meet Your Seller
Stanlamp RLC-108 (Original Bulb Inside) for Viewsonic PA503S PA503SP PA503X PA503XP PA500S PA502SE PA502XE PG603X PS501X PS600X VS16905 Projector Replacement Lamp Bulb-1 Year Warranty
- [Compatible model]Fit for PA503S PA503SP PA503X PA503XP PA500S PA502SE PA502XE PG603X PS501X PS600X VS16905 VS16909 Projector
- [Perfect Quality Wick]Stanlamp has been researching replacement bulbs for 20 yearswe are committed to providing customers with long life, high brightness, stable output.
- [Long Life Time]4000 (normal) / after 4008 hours (economy) can adjust to the ECO mode to save energy and use it for a long time.We will save you a lot of money on bulb replacements.
- [Easy to Install]We have prepared an installation kit for you. You can use the tools we prepared for you to replace the light bulb quickly. After installation, you can enjoy the audio-visual feast .
- [After sale]:Stanlamp can make sure all the bulbs that have quality problems within six months, we will be responsible for the end.We strive to provide you with the best products and customer service.
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Stanlamp Information: Stanlamp has own factory and many experienced workers. Every lamp will be take strict quality test before leaving factory. So you don't need to doubt the quality.
number: ELP89
V13H010L89Application:
Business/Education/Home/SchoolCompatible: for EPSON EH-TW8300 EPSON 5040UBE
Package: 1 bulb with housing1
Instructions sheetInstallation: 1. Turn off the projector and unplug the power cord. 2. Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3. Loosen the lamp cover screw. Then slide the lamp cover off. 4. Loosen the two screws holding the lamp in place. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. Then tighten its screws. 7. Replace the lamp cover, then tighten its screw.
Notes: 1. To avoid burns, allow the projector to cool for at least 60 minutes before replacing the lamp. 2. We provide excellent refund service with no any contidition with 20 hours feedback. If you have any questions, please contact us. We will try our best to sole your problem as soon as possible.
Specifications
: Partnumber: ELP89
V13H010L89Application:
Business/Education/Home/SchoolCompatible: for EPSON EH-TW8300 EPSON 5040UBE
Package: 1 bulb with housing1
Instructions sheetInstallation: 1. Turn off the projector and unplug the power cord. 2. Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3. Loosen the lamp cover screw. Then slide the lamp cover off. 4. Loosen the two screws holding the lamp in place. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. Then tighten its screws. 7. Replace the lamp cover, then tighten its screw.
Notes: 1. To avoid burns, allow the projector to cool for at least 60 minutes before replacing the lamp. 2. We provide excellent refund service with no any contidition with 20 hours feedback. If you have any questions, please contact us. We will try our best to sole your problem as soon as possible.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by VersaCom Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...