ViaBecs AHD 720P/1080P Rear View Camera for Car, HD Night Vision Car Backup Camera 170 Wide Angle, IP69 Waterproof Reverse Camera for Car GM Pickup Mini-Trucks SUV Mini-RV

Check AHD Compatibility Before Purchase This reverse camera outputs AHD 720P/1080P at 25fps. Please confirm that your screen or head unit supports AHD signal input at these formats before ordering.
Note: If your Android units only support NTSC format, please don't buy our backup camera. After installation, dont forget to set the correct video signal format to activate the camera display. ^^ Dual Resolution Modes 720P & 1080P Default resolution is 1280x720P @ 25fps (white line uncut). Cut the white line to switch to 1920x1080P @ 25fps for higher clarity.
Important: Some monitors or Android head units do not support AHD 1080P. If unsure, do not cut the white line to avoid compatibility issues. ^^ Reversing Guide Line Rearview Camera with Switcher Cables It generates AHD-720P-25fps video signal and reversing guide line by default. Cut the white wire to make the camera generate AHD-1080P-25fps video signal. Cut the green wire to turn off the guide line.
NOTE: Please disconnect and then reconnect the camera power cable after cutting any wire to activate it. ^^ Auto White Balance & Color CorrectionThe truck backup camera support auto white balance and color correction tech. Night vision is very good and the video quality is perfect. Car backup cameras have high-definition sensors, providing clear and true color reproduction to the driver day or night. You can install it with your touch screen stereo and it will work perfectly! ^^ 170 Degree Wide Viewing AngleThe wider the field of vision, the smaller the blind spots. The backup camera for truck picks up the slack with a wide 170-degree view field, eliminating blind spots once and for all. A 45-degree adjustment angle adds increased visibility, allowing you to adjust the rear camera to a position that's best for you. ^^ Amazing IP69 WaterproofThis rv backup camera with IP69 waterproof IP rate. It is designed with a fully sealed glue-filling craft, so you absolutely do not need to worry about water, fog, rain, or mist. you can also wash your awesome car in a high-pressure washer or in an automated car wash.

^^ Installation is easyTo install a car reverse camera on the back of your bumper or on the tailgate handle. you need to remove the little bracket and turn it (designed to do this). Well-designed adjustable mechanism. You can adjust the angle up and down through the metal bracket. Very easy to install.