Your Browsing History
Meet Your Seller
LUMINOR RL-999 UV Lamp for Blackcomb LB4-151, LB5-151, LB6-151
- GENUINE LUMINOR RL-999 REPLACEMENT LAMP: This is the factory lamp built by Luminor for BLACKCOMB 4.1, 5.1, and 6.1 systems, not an aftermarket equivalent. Luminor tests and certifies its systems and lamps as a complete unit, so the output rating on your system applies only when a genuine RL-999 Luminor lamp is installed
- RESET KEY INCLUDED IN EVERY BOX: Each RL-999 ships with the Luminor lamp key, the part that lets the controller clear its hour counter once the new lamp is seated. Without the key, the system keeps counting against the old lamp, so having it in the box means no second order and no delay between opening the package and finishing the job
- FITS LB4-151, LB5-151, and LB6-151: One lamp covers all three 15 GPM BLACKCOMB models, whether you have the basic 4.1 controller, the 5.1 with its display, or the 6.1 with the UV sensor. The model number is printed on the chamber label. Note that the higher-flow LBH series is a different reactor family and does not take this lamp
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
The Luminor RL-999 replacement lamp is the genuine factory UV lamp for BLACKCOMB whole-home systems, covering the 4.1, 5.1 and 6.1 models rated at 15 GPM. Every lamp ships with the Luminor reset key, so the controller hour counter can be cleared the same day the new lamp goes in and there is no second part to chase down.
SPECIFICATIONS Part number: RL-999
Power: 50 watts
Length: 39.3 in.
(999 mm) Rated life: 9, 000 hours, roughly 12 months
Connector: bayonet style, seats by hand
Includes: lamp and reset key
Fits: LUMINOR BLACKCOMB LB4-151, LB5-151, LB6-151 CHECK YOUR MODEL FIRST The model number is printed on the reactor label. This lamp fits the LB-151 series only. Luminor also builds a higher-flow LBH series carrying similar numbers, and those reactors take a different lamp, so it is worth a look at the label before ordering. WHEN TO REPLACE UV-C output from a low-pressure lamp weakens gradually as run hours build, well before the lamp stops lighting, which means a lamp that still glows is not necessarily still performing. Luminor rates the RL-999 for 9, 000 hours, so most households install a new lamp once a year. The RQ-999 quartz sleeve sits between the lamp and the water and is on a 24-month schedule, since film and scale on the sleeve reduce output the same way an aged lamp does. Owners who prefer to handle both at once order the RLQ-999 lamp and sleeve kit on alternating years. WHY GENUINE MATTERS Luminor tests and certifies its reactors and lamps together as one complete unit. Installing a non-Luminor lamp voids those system certifications and may compromise your warranty if an issue arises later.
The RL-999 Luminor lamp holds the system to the specification it was built and rated against.
SPECIFICATIONS Part number: RL-999
Power: 50 watts
Length: 39.3 in.
(999 mm) Rated life: 9, 000 hours, roughly 12 months
Connector: bayonet style, seats by hand
Includes: lamp and reset key
Fits: LUMINOR BLACKCOMB LB4-151, LB5-151, LB6-151 CHECK YOUR MODEL FIRST The model number is printed on the reactor label. This lamp fits the LB-151 series only. Luminor also builds a higher-flow LBH series carrying similar numbers, and those reactors take a different lamp, so it is worth a look at the label before ordering. WHEN TO REPLACE UV-C output from a low-pressure lamp weakens gradually as run hours build, well before the lamp stops lighting, which means a lamp that still glows is not necessarily still performing. Luminor rates the RL-999 for 9, 000 hours, so most households install a new lamp once a year. The RQ-999 quartz sleeve sits between the lamp and the water and is on a 24-month schedule, since film and scale on the sleeve reduce output the same way an aged lamp does. Owners who prefer to handle both at once order the RLQ-999 lamp and sleeve kit on alternating years. WHY GENUINE MATTERS Luminor tests and certifies its reactors and lamps together as one complete unit. Installing a non-Luminor lamp voids those system certifications and may compromise your warranty if an issue arises later.
The RL-999 Luminor lamp holds the system to the specification it was built and rated against.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by JMDesign Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...