Wimberley AP-554 Replacement Lens Foot for Nikon 500 f4.0 AF-S I, II, VR - Arca-Swiss Style - Made in USA

About the AP-554 Replacement Lens Foot The AP-554 replaces the stock foot on Nikon Lenses (See list below, Image of compatibility chart, or our site). When installed this support lowers the overall height of the 500mm lens by 1" and the 200-400mm lenses by 0.1". The AP-554 is precision machined to slide right into an Arca-Swiss style quick-release clamp. It also has 1/4" and 3/8" tapped holes for mounting to non-quick-release tripod heads and monopods. All replacement feet feature the same dual safety stops and flash bracket compatibility as our lens plates. The AP-554 is an alternative to our AP-553 foot.

It has the advantage of greater clearance between the body of the lens and the foot, making it easier to use the foot as a handle for your lens. It is also longer which facilitates balancing of lenses on light-weight camera bodies as well as the heavier pro and prosumer Nikon camera bodies, even when using teleconverters. For use on the following Lenses Nikon 500 f/4 AF-S versions I, II, and VR Nikon 200-400 f/4 AF-S VR I and II Nikon 300 f/ 2.8 VR I and II What's Included AP-554 Arca-Swiss Style replacement lens foot (Qty 1) Mounting Screws M3 x 12mm Socket Head Cap Screw (Qty 4) Safety Stop Screws - M3 x 6mm Socket Head Cap Screw (Qty 2) Hex Key 2.5 mm (Qty 1) Not compatible with most Manfrotto or Gitzo clamps