SunnyPro BL-FP230D/BL-FP230H/BL-FP230J/SP.8EG01GC01 Replacement Lamp Compatible for Optoma DH1010 EH1020 EW615 EX612 EX615 GT50E GT50ECA GT750 HD1081 HD180 HD20 HD200X HD22 HD2200 HD23 PRO800P

Model Number: BL-FP230H
BL-FP230JApplication: Commercial, Engineering, Indoor, Professional, SailingWattage:
230WType: Bare Lamp with housingAverage
Life (hrs): 2500Be
used in projectors: for OPTOMA DH1010 EH1020 EW615 EX612 EX615 GT50E GT50ECA GT750 HD1081 HD180 HD20 HD200X HD200X-LV HD20-LV HD22 HD2200 HD23 PRO800P SP. 8EG01GC01 SP. 8MY01GC01 TH1020 TW615-3D TX612 TX615 TX615-3D9 steps to replace the projector lamp1. Gather the necessary tools, screwdriver. 2. Turn off TV or Projector. 3. Remove Lamp Compartment Door. 4. Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp! 5. Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment. 6. Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out. 7. Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.

8. Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual. 9. You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.