Your Browsing History
Meet Your Seller
Stanlamp A+ NP22LP for NEC NP-PX700W PX750U PX750U2 PX800X NP-PX750U NP-PX750U2 NP-PX800X PH1000U PH1000U PX700W PX700W2 PX700WG PX800X2 Replacement Projector Lamp Bulb with Housing
- Compatible projector model:for Nec NP-PH1000U Nec NP-PX700W Nec NP-PX700W-08ZL Nec NP-PX750U Nec NP-PX750U-18ZL Nec NP-PX800X Nec NP-PX800X-08ZL NP-PX700W NP-PX750U NP-PX750U2 NP-PX800X PH1000U PH1000U PX700W PX700W2 PX700WG PX750U PX750U2 PX800X PX800X2
- [Easy to Install]We have prepared an installation kit for you. You can use the tools we prepared for you to replace the light bulb quickly. After installation, you can enjoy the audio-visual feast .
- [Long Life Time]4000 (normal) / after 4000 hours (economy) can adjust to the ECO mode to save energy and use it for a long time.We will save you a lot of money on bulb replacements.
- [Perfect Quality Wick]Stanlamp has been researching replacement bulbs for 12 yearswe are committed to providing customers with long life, high brightness, stable output.
- [After sale]:Stanlamp can make sure all the bulbs that have quality problems within six months, we will be responsible for the end.We strive to provide you with the best products and
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Installation: 1. Turn off the projector and unplug the power cord. 2. Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3. Loosen the lamp cover screw. Then slide the lamp cover off. 4. Loosen the two screws holding the lamp in place. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. Then tighten its screws. 7. Replace the lamp cover, then tighten its screw.
Notes: 1. To avoid burns, allow the projector to cool for at least 60 minutes before replacing the lamp. 2. We provide excellent refund service with no any contidition with 12 hours feedback. If you have any questions, please contact us. We will try our best to sole your problem as soon as possible.
Notes: 1. To avoid burns, allow the projector to cool for at least 60 minutes before replacing the lamp. 2. We provide excellent refund service with no any contidition with 12 hours feedback. If you have any questions, please contact us. We will try our best to sole your problem as soon as possible.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by LingGo Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...