Your Browsing History
ElecGear Hall Joystick Kit Replacement for DualSense PS5 Controller, 2X Hall Effect Control Stick + 2X Calibration PCB + Desoldering Repair Tools for Analog Stick Thumbsticks HL-PS5
- [2x Hall Effect Joysticks for PS5] Hall thumbsticks Replacement for PS5 controller (DS5). With the electromagnetic hallstick sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. (Warning: Not work with DS Tools on Github for it does not work with this MCU.)
- [2x Added-on Calibration PCB] The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. The calibrated signal outputs to the main board of controller. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming
- [Desoldering Tools included] A copper heating plate melts all the solder joints simultaneously simply with a soldering iron. Solder Wick, Holes Cleaner and simple PCB holder included. With as many as 14 prongs, removing the old problem stick is the mo
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Model: HL-PS5Hall Effect Joysticks Replacement for PlayStation 5 Wireless ControllerCalibration PCB with MCU for the finest Centering and Rocking CurveA Copper Heating Plate and Solder Wick help a lot for the
DesolderingReminders: 1. Works with DualSense PS5 controller with main board BDM-010, BDM-020, BDM-030 and BDM-0402. Not work with DualSense Edge (DSE) 3.
Warning: Not work with DS Tools on Github for it does not work with this MCU4. Not fully tested with some customized controllers based on DS5 like SCUF and other 3rd. The added back button board might be removed before settings5. The operation takes serious soldering skill and devices. The soldering iron must be more than 60W6. Seriously follow the steps we presented on the guide for this kit is novel and tricky7. Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however
NOT includedWhats in the box: 2x Hall Joysticks2x Calibration PCB1x Heating Plate
DesolderingReminders: 1. Works with DualSense PS5 controller with main board BDM-010, BDM-020, BDM-030 and BDM-0402. Not work with DualSense Edge (DSE) 3.
Warning: Not work with DS Tools on Github for it does not work with this MCU4. Not fully tested with some customized controllers based on DS5 like SCUF and other 3rd. The added back button board might be removed before settings5. The operation takes serious soldering skill and devices. The soldering iron must be more than 60W6. Seriously follow the steps we presented on the guide for this kit is novel and tricky7. Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however
NOT includedWhats in the box: 2x Hall Joysticks2x Calibration PCB1x Heating Plate
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by DuronTechnologies Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...