• $83.99
  • Sold by VersaCom

    Shipped by VersaCom

    Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    ALZO Short Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment with 10 Inch Drop

    • Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
    • Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch; projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install
    • Includes an AMERICAN WRITTEN installation manual with illustrations and photos
    • Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole
    • Projecto
    +
    +
    Overview
    Specs
    Reviews
    avatar

    Any questions? Our AI beta will help you find out quickly.

    Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, Projector drop from the ceiling is 10 inches, and accessory extension rods can be added to lower the projector2-axis locking tilt adjust with maximum 25 degrees pitch makes installation fast and stableMount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectorsIncludes an American written installation manual with illustrations and photosIncludes scissor clamp and one 8 inch aluminum suspension rodThe projector is not included; it is shown for demonstration purposes onlyThis easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling.

    The simple assembly includes all metal parts and a kit of assembly screws and hardware. The two-axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. Attaches to your projector with 3 or 4 legs of the gimbal spider mount. The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce the maximum leg span. Typical mounting screws are supplied with this mount but with some projectors, you may need to use the mounting screws included with your projector. Fits Epson, Optoma, Benq, Viewsonic and most other projectors.

    Projector drop from the ceiling is only 10 inches. Includes an American written installation manual. Accessory 8-inch extension rods can be added to lower the projector, see below for accessory rods. Video Projector is not included, it is shown for demonstration purposes. NOT COMPATIBLE WITH ViewSonic PJD7820HD projector. AccessoriesClick here for projector mount accessoriesManualClick here for ALZO Installation manual

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...