JAENFONG PCI-E to USB 3.0 PCI Express Card incl.1 USB C and 2 USB A Ports,Type B, NVME not Supported, SATA Input, NGFF Output, SATA Protocol M.2 only, with Flat Bracket

About this item

ADD 3 NEW USB 3.0 PORTS: The PCI Express card provides your standard, up-to-date desktop PC with 2 USB 3.0 Type-A ports and 1 Type-C port for use with most USB peripherals. Enjoy copying videos, music, photos, data files between USB devices and computers at high speed.

INCREASE YOUR USB SPEED TENFOLD: Your new PCIE USB 3.0 expansion card supports SuperSpeed USB 3.0 transfer rates of up to 5 Gbit / s. Backwards compatible with USB 2.0 and 1.1 devices. Actual speeds limited by the operating system, setting of the connected device or the motherboard.

SUPPORTS M. 2

B-KEY INTERFACE AND SATA SSD: does not support M. 2 M-Key interface and PCIe NVME / AHCI solid-state drive. Supports SATA III Solid State Drive like Samsung 850 EVO, 860 EVO, WD Blue 3D NAND, Crucial MX500.

OPERATING SYSTEM COMPATIBILITY: Supports Windows XP / Vista / Server / 7/8/10, Linux. Windows XP, Vista, Server, Windows 7 and Linux are equipped with included drivers. No additional drivers are required for Win8 / 8.1 /

10. Please contact us to get the USB driver download link if required.

COMPATIBLE WITH PCI-E 3.0 MOTHERBOARDS: backward compatible with PCIe 2.0 and PCIe 1.0; fits any PCI Express x1, x4, x8 or x16 socket. Does not support PCI interface. Please do not use SATA connectors to connect to HDD / SSD, as these are used for M. 2 SSD data transfer.

Package Contents:

1 x MZHOU PCI Express adapter card

1 x low-profile PCIe bracket

1 x SATA cable

Note:

Before installing, please make sure that a PCI Express x1, x4, x8 or x16 slot is available. Not suitable for PCI slot.

It is only designed for M. 2 SATA III SSD with B-Key. Not compatible with M. 2 PCIe / AHCI SSD.

Windows 7/8 / 8.1 / 10 / Linux with included drivers. No additional USB drivers are required for Win8 / 8.1 / 10.

When inserting the M. 2 SSD into the SATA protocol, one end of a SATA III data cable must be used, which is connected to the SATA interface of the riser card, and the other end of the SATA III interface of the mainboard.