Upgraded ADT-F9G-BK7 PCIe X16 to OcuLink SFF-8612 Docking Station PCIe4.0 64Gbps External Graphics Extension Card (F9G-BK7-K9934A 50cm)

Upgraded ADT-F9G-BK7 PCIe X16 to OcuLink SFF-8612 Docking Station PCIe 4.0 64Gbps External Graphics Extension Card
Product Detail: Product
Model: F9G-BK7-F9934A
Product Name: Oculink External Graphics Docking Station
Transmission speed: PCIe 4.0 x4, effective bandwidth 64Gbps
Product Description: Oculink is an interface that is adapted from the NVME SSD slot on the motherboard of the computer, NVME takes the pure PCIe channel, so the Oculink external graphics docking station also takes the PCIe channel, which has a small performance loss. Compared to traditional Thunder bolt-compatible adapter solutions, Oculink's effective bandwidth can reach 64Gbps under PCIe 4.0 x4, far exceeding Thunder bolt-compatible solutions.
Friendly reminder: OcuLink does not support hot-swap
Power supply: Support standard ATX 500W power supply, power supply needs to be prepared by the buyer.
Excellent SI performance: signal rates up to PCIe4 16GT/s and SAS 4.0 24Gbps Supports 85 ohm impedance applications, 100 ohm is available on request The switch on the graphics card dock: Switch toggle to 1 is auto-start, you can follow the startup; toggle to 2 is forced startup, directly powering the graphics card docking station, which is risky, toggle to 1 auto-start can be enough. D1 light represents cable detection, some cables will cause the D1 light does not light. D2 light represents the power supply status of the docking station, light means that the docking station is in the startup state. D3 light may not light up when using some AMD-compatible graphics cards. D4 light is off under normal conditions, only in the opening and closing will blink a little.