Lens Collar 61.5mm Tripod Mount Ring with Quick Release Plate for Sony FE 12-24mm F4 G, FE 85mm F1.8, FE 16-35mm F2.8 GM, FE 50mm F2.8 Macro, FE 18-105mm F4 G OSS PZ, FE 16-70mm F4 ZA OSS,85mm F1.4 GM

Main features: 1. The net weight is about 155g; 2. This camera lens bracket cannot be rotated. Tailor-made according to the lens. Positioning by the switch and bayonet. All corners are grinding rounded, using 3M plastic film inside to prevent lens wear; 3. The inner diameter of the lens support is about 61.5 mm and the width is about 18mm. Added the function of quick release plate. The length of the plate is about 55mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screws;
Applicable to:
(Note: This range means that the tripod ring can be installed on those lenses. There may be some lenses does not match very well with the volume of this ring: after installation, some lenses may looks relatively small, and the tripod ring is relatively large, which may not seem very harmonious; but this will not affect the use. Therefore this range is for reference only.
)Sony: E 10-18mm F4 OSS (SEL1018) FE 12-24mm F4 G (SEL1224G) FE 16-35mm F4 ZA OSS (SEL1635Z) FE 16-35mm F 2.8 GM (SEL1635GM) FE 16-70mm F4 ZA OSS (SEL1670Z) E PZ 18-105mm F4 G OSS (SELP18105G) E 18-135mm F 3.5 - 5.6 OSS (SEL18135) FE 24mm F 1.4 GM (SEL24F14GM) FE 24-70mm F4 ZA OSS (SEL2470Z) FE 24-70mm F 2.8 GM (SEL2470GM) FE 24-105mm F4 G OSS (SEL24105G) FE 24-240mm F 3.5 - 6.3 OSS (SEL24240) FE 28-70mm F 3.5 - 5.6 OSS (SEL2870) FE 35mm F 1.4 ZA (SEL35F14Z) FE 50mm F 1.4 ZA (SEL50F14Z) FE 50mm F 2.8 Macro (SEL50M28) FE 85mm F 1.4 GM (SEL85F14GM) FE 85mm F 1.8 (SEL85F18) FE 90mm F 2.8 Macro G OSS (SEL90M28G) FE 100mm F 2.8 STF GM OSS (SEL100F28GM)
Package Including: 1 x iShoot Tripod Mount Ring IS-S24240FE