Your Browsing History
Meet Your Seller
C8051F320 Single Chip Development Board Mixed Signal ISPFLASH Microcontroller Module Board CJMCU-5132 UART 5V Single Chip Microcomputer
- USB Function Controller USB specification 2.0 compliant Full speed (12 Mbps) or low speed (1.5 Mbps) operation Integrated clock recovery; no external crystal required for full speed or low speed Supports eight flexible endpoints 1 kB USB buffer memory Integrated transceiver; no external resistors required On-Chip Debug On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required) Provides breakpoints, single stepping, inspect/modify memory and registers Superior performance to emulation systems using ICE-chips, target pods, and sockets Voltage Regulator Input: 4.0 to 5.25 V High Speed 8051 µC Core Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks Up to 25 MIPS throughput with 25 MHz clock Expanded interrupt handler Memory 2304 bytes internal RAM (1k + 256 + 1k USB FIFO) 16 kB Flash; In-system programmable in 512-byte sectors Digital Peripherals 25/21 Port I/O; All 5V tolerant with high sink current Hardware enhanced SPI, enhanced UART, and SMBus serial ports Four general purpose 16-bit counter/timers 16-bit programmable counter array (PCA) with five capture/compare modules Real time clock mode using external clock source and PCA or timer Clock Sources Internal Oscillator: 0.25% accuracy with clock recovery enabled. Supports all USB and UART modes External oscillator: Crystal, RC, C, or Clock (1 or 2 pin modes) Can switch between clock sources on-the-fly; useful in power saving strategies Temperature
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
The C8051F320 /1 series utilizes the proprietary CIP-51 microcontroller core of Silicon Labs. The CIP-51 is fully compatible with MCS-51M instruction sets; Software can be developed using standard 803x / 805x assembler and compiler; The CIP-51 core provides all the peripherals that come with the standard 8052, including four 16-bit counters/timers, full-duplex UART with extended baud rate configuration, enhanced SPI ports, 2304-byte on-chip RAM, 128-byte Special Function Register (SFR) address space and 25/21 I/0 pins.; 10-Bit ADC, Up to 200 ksps, Up to 17 or 13 external single-ended or differential inputs, VREF from external pin, internal reference, or VDD; USB specification 2.0 compliant, Full speed (12 Mbps) or low speed ( 1.5 Mbps) operation,
Voltage Regulator Input: 4.0 to 5.25 V; C8051F320 Single Chip Development Board built-in temperature sensor, External conversion start input, Two Comparators, Internal Voltage Reference, POR/Brown-Out Detector
Voltage Regulator Input: 4.0 to 5.25 V; C8051F320 Single Chip Development Board built-in temperature sensor, External conversion start input, Two Comparators, Internal Voltage Reference, POR/Brown-Out Detector
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Kepler Forge Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...