• $13.78
  • Free 30-day Returns
  • Ships from China.
    Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    JVFYI USB Support to COM Module Cable USB to RS232 TTL UART PL2303HX Pl2303 Auto Converter

    Limited time offer, ends 01/12 By Silicore Tech

    • USB Support to COM Module Cable USB to RS232 TTL UART PL2303HX Pl2303 Auto Converter
    +
    +
    Overview
    Specs
    Reviews
    avatar

    Any questions? Our AI beta will help you find out quickly.

    Certification:NONE

    Origin:CN(Origin)

    Connector A:TYPE-C

    External Power Source:Yes

    Connector B:DP/Mini DP

    Gender:Male-Male

    Name:USB to TTL download cable

    Length:1 meter

    Chip:PL2303HX, PL2303TA

    type1:TTL download line

    type2:Download line

    type3:Auto Converter


    Line sequence defined red +5 V, black GND, green RXD, white TXD

    Note: 3.3V and 5.0V output is set (this is the power supply to the microcontroller, upgrade machines do not need the small plate) unplugged from the computer, set the jumpers to take, do not live to avoid damage to the equipment.

    The wrong connection be sure to find the pin definitions, especially GND must not be connected to the voltage on the pin, and the RX and TX terminal is not connected to the VCC pin (actual measurement of some VCC pin voltage up to 14V.) shall be burnt adapter cable chip, certain note, do not take their own small plate to experiment, or burn We are not responsible. Must find the pin definitions in the next.

    Connection method: repeat Brush only need three lines, generally used in the RX TX GND three signal lines, the VCC without access. The above 4,5 needle friend, not connected to VCC and BT needle. Use RXD connected with the target board TX phase, TXD and target board RX, GND connected to GND if not, swap RX and TX.

    Name: USB to TTL download cable

    Colour: Black

    material: plastic

    Length: 1 meter

    Chip: PL2303HX, PL2303TA

    Line sequence definition red +5v, black GND, green TXD, white RXD.

    Link mode: RX to TX, TX to RX, ground-to-ground, USB to serial port function: simple serial port, router or ADSL ancient sword upgrade, GPS serial communication, hard disk ancient sword upgrade. Easy to use, RX is connected to the TX of the MCU, and TX is connected to the RX of the MCU, and it is connected to the ground, without the need for MAX232 conversion.

    Used in HyperTerminal, serial debugging tools are commonly used, and various satellites are used for upgrading.

    Package Contents: 1pcs x download line

    Only the above package content, other products are not included.

    Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...