Skip to main content
  • $31.32
  • Free 30-day Returns
  • Ships from China.
    Price alert
    Shop it at NeweggBusiness.

    AJMRTC AW9523B IO Expansion Board, I2C 16-Channel GPIO Expander & Constant Current LED Driver, 256-Step Dimming, Interrupt Output, Compatible with Raspberry Pi, Micro:bit, Arduino, STM32

    • - Built around AW9523B chip, expands 16 multi-function I/O pins via simple I2C two-wire bus
    • - Dual working modes: configurable as GPIO expander or 16-channel common anode LED driver
    • - Supports 256-step linear dimming for LEDs and adjustable constant current control
    • - I2C address selectable, up to 4 boards stacked for maximum 64 expanded IO ports
    • - Equipped with INT interrupt pin and RST reset pin, onboard 3.3V/5V level translation
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    AJMRTC AW9523B IO expansion module is a multifunctional I2C GPIO expander and LED driver breakout board. Each of its 16 ports can be independently set as input or output for button detection, relay control and peripheral triggering. In LED mode, it delivers smooth 256-level dimming with constant current output to protect LEDs. The interrupt pin alerts the main controller once input states change to reduce polling load. With configurable I2C address, multiple modules can be cascaded freely. It features level shifting circuitry to support both 3.3V and 5V logic systems, and comes with demo codes for Raspberry Pi, micro:bit, Arduino and STM32. Great for smart lighting arrays, button matrix, robotic control and embedded projects that need extra IO resources.


    Specifications

    1. Chip: AW9523B
    2. Control Interface: I2C
    3. Expanded IO Quantity: 16
    4. LED Dimming: 256-step linear dimming, constant current drive
    5. Address Configuration: Adjustable via A0/A1 jumper
    6. Maximum Cascading: 4 boards, up to 64 IO
    7. Power Supply: 2.4V to 5.5V
    8. Level Compatibility: 3.3V / 5V
    9. Pinout: SDA, SCL, INT, RST, VCC, GND
    10. Supported MCU: Raspberry Pi, Micro:bit, Arduino, STM32
    11. Application: LED array control, key matrix, GPIO expansion, IoT embedded development


    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...