Your Browsing History
Meet Your Seller
RP2350-PiZero Microcontroller Development Board Based on Raspberry Pi RP2350, Onboard DVI Interface, TF Card Slot and PIO-USB Port, Compatible with Raspberry Pi 40PIN GPIO Header, 16MB Flash
- RP2350-PiZero development board based on Raspberry Pi RP2350 dual-core & dual-architecture microcontroller: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz; 520KB of S-R-A-M, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion. Onboard TF card slot for reading and writing TF card. Type-C connector for easier use; Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard bat-tery recharge/discharge header, suitable for mobile scenarios; Adapting 5 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support; USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
RP2350-PiZero development board based on Raspberry Pi RP2350 dual-core
& dual-architecture microcontroller: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
520KB of S-R-A-M, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion. Onboard TF card slot for reading and writing TF card. Type-C connector for easier use
Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard bat-tery recharge/discharge header, suitable for mobile scenarios
Adapting 5 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support
USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip
& dual-architecture microcontroller: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
520KB of S-R-A-M, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion. Onboard TF card slot for reading and writing TF card. Type-C connector for easier use
Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard bat-tery recharge/discharge header, suitable for mobile scenarios
Adapting 5 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support
USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by TERRA HAVEN Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...