Your Browsing History
Meet Your Seller
Compute Module 4 to Raspberry Pi 3 Model B/B+ Adapter, Alternative Solution for Raspberry Pi 3 Model B/B+, Support Access to CM4 Lite/eMMC Series Boards
- Install CM4 EasilyRaspberry Pi CM4 to 3B Adapter is an alternative solution for Raspberry Pi 3 Model B/B+, onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance; Interface IntroductionOnboard 4-ch USB ports, RJ45 Gigabit Ethernet Port, PoE header, HDMI Port, DSI port, CSI port, 3.5mm Headphone Jack(extended from USB) etc.; Compatible with Pi 3B Series HATsEasy access to Raspberry Pi 3B series HATs or other development projects; Note1Micro USB port is for power supply and for programming images USB SLAVE. Please do not connect to other devices when programming the image by micro USB so as to ensure that CM4 can be powered on normally; Note2When using CM4, you need to provide 5V/4A to CM4. Otherwise, it may power off, lower frequency, etc. USB 2.0 is close by default, if used dtoverlay=dwc2,dr_mode=host should be added in config.txt. It only supports 5V fan,12V is not supported
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Install CM4 EasilyRaspberry Pi CM4 to 3B Adapter is an alternative solution for Raspberry Pi 3 Model B/B+, onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance
Interface IntroductionOnboard 4-ch USB ports, RJ45 Gigabit Ethernet Port, PoE header, HDMI Port, DSI port, CSI port, 3.5 mm Headphone Jack (extended from USB) etc.
Compatible with Pi 3B Series HATsEasy access to Raspberry Pi 3B series HATs or other development projects
Note1Micro USB port is for power supply and for programming images USB SLAVE. Please do not connect to other devices when programming the image by micro USB so as to ensure that CM4 can be powered on normally
Note2When using CM4, you need to provide 5V/4A to CM4. Otherwise, it may power off, lower frequency, etc. USB 2.0 is close by default, if used dtoverlay=dwc2, dr_mode=host should be added in config. txt. It only supports 5V fan, 12V is not supported
Interface IntroductionOnboard 4-ch USB ports, RJ45 Gigabit Ethernet Port, PoE header, HDMI Port, DSI port, CSI port, 3.5 mm Headphone Jack (extended from USB) etc.
Compatible with Pi 3B Series HATsEasy access to Raspberry Pi 3B series HATs or other development projects
Note1Micro USB port is for power supply and for programming images USB SLAVE. Please do not connect to other devices when programming the image by micro USB so as to ensure that CM4 can be powered on normally
Note2When using CM4, you need to provide 5V/4A to CM4. Otherwise, it may power off, lower frequency, etc. USB 2.0 is close by default, if used dtoverlay=dwc2, dr_mode=host should be added in config. txt. It only supports 5V fan, 12V is not supported
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by TERRA HAVEN Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...