Original Xilinx Platform Cable USB II DLC10 JTAG Programmer Debugger HW-USB-II-G for FPGA CPLD Development Board

FeaturesHigh-performance FPGA and PROM programming andconfiguration

Includes innovative FPGA-based acceleration firmware encapsulated in a small form facto

pod

attached to the cable

Leverages high-speed slave-serial mode programming interface

Note: Slave-serial mode is supported in Xilinx iMPACT software v10.1.

Recommended for prototyping use only

Easy to use

Fully integrated and optimized for use with Xilinx iMPACT software

Intuitive multiple cable management from a single application

Supported on the following operating systems:

Note: See the Xilinx design tool release notes for

supported operating systems.

Microsoft Windows XP Professional

Microsoft Windows Vista

Red Hat Enterprise Linux

SUSE Linux Enterprise

Automatically senses and adapts to target I/O voltage

Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V

Intuitive flyleads-to-cable interface labelingReliable

Backwards compatibility with Platform Cable USB,including Pb-Free (RoHS-compliant)

USB Integrators Forum (USB-IF) certified

CE and FCC compliant

Programs and configures all Xilinx devices

Leverages industry standards, including JTAG boundary-scan IEEE 1149.1, SPI and USB 2.0

XC18VO0 ISP PROMs

Platform Flash XCF00S/XCF00P/XL PROMs

All UltraScale, 7 series, Virtex, and Spartan

FPGA families, and Zynq-7000 AP SoCs

XC9500XL and CoolRunner XPLA3 /CoolRunner-Il CPLDs

Note: Xilinx iMPACT software or Vivado design tools

are required for programming and configuration. See the

design tool release notes for supported devices.Third-party PROM device programming support

Directly programs selected Serial Peripherallnterface (SPl) flash memory devices

Note: Direct SPI flash memory programming supported in Xilinx iMPACT software v10.1.

Highly optimized for use with Xilinx design toolsVivado design tools or ISE design tools

ndirectly programs selected SPI or parallel flash memory devices via FPGA JTAG port

Embedded Development Kit

ChipScope Pro Analyzer

System Generator for DSP

Platform Cable USB II Description

Much more than just a simple USB cable, Platform Cable USB II provides integrated firmware (hardwareand software) to deliver high-performance, reliable and easy-to-perform configuration

of Xilinx devices.

Platform Cable USB Il attaches to user hardware for the purpose of configuring Xilinx FPGAs, programming Xilinx PROMs and CPLDs, and directly programming third-party SPI flash devices. Inaddition, the cable provides a means of indirectly programming Platform Flash XL, third-partySPiflash memory devices, and third-party parallel NOR flash memory devices via the FPGA JTAGport. Furthermore,Platform Cable USB Il is a cost effective tool for debugging embedded software and firmware when used with applications such as Xilinx's Embedded Development Kit andChipScope Pro Analyzer.

Platform Cable USB Il is an upgrade to and replaces Platform Cable USB. Similar to its popular predecessor, Platform Cable USB Il is intended for prototyping environments only. Platform Cable USB Il is backwards Compatible with Platform Cable USB and is supported by all Xilinx designtools that support Platform Cable USB.Platform Cable USB Il attaches to the USB port on a desktop or laptop PC using an off-the-shelfHi-Speed USB A-B cable.The cable derives all operating power from the hub port controller - no external power supply is required.Note: Sustained data transfer rates in a Hi-Speed USB environment vary according to the number of USB devices sharing the hubbandwidth. Native signaling rate (480 MHz) is not directly corr

elated to application throughput.Device configuration and programming operations using Platform Cable USB Il are supported by Xilinx iMPACT download software using boundary-scan (IEEE 1149.1/IEEE 1532), slave-serial mode, or serial peripheral interface (SPl). The Vivado design tools support device configuration with the Platform Cable USB Il using boundary-scan (IEEE 1149.1).Note: iMPACT software is bundled with the ISE design tools and WebPACK ISE software. The slave-serial mode and direct SPI are only supported in limited versions of the ISE iMPACT tool.In addition, Platform Cable USB Il is optimized for use with the Xilinx Embedded DevelopmentKit, ChipScope Pro Analyzer,and System Generator for DSP. When used with these software tools, the cable provides a connection to embedded target systems for hardware configuration, software download, and real-time debug and verification. Target clock speeds areselectable from 750 kHz to 24 MHz.

Platform Cable USB Il attaches to target systems using a 14-conductor ribbon cable designed for high-bandwidth datatransfers. An optional adapter for attaching a flying lead set is included for backward compatibility with target systems not using a ribbon cable connector.Device Family Support

I Kintex UltraScale+

I Kintex UltraScale

IVirtex UltraScale+

IVirtex UltraScale

Spartan-7IArtix-7

1Zynq-7000

Kintex-7

I Virtex-7

I Virtex-6

I Virtex-5 FX

I Virtex-5 LX

I Virtex-5 SX

I Virtex-4

I Virtex-Il Pro

I Virtex-ll

I Virtex-E

I Virtex

I Spartan-6

I Spartan-3A

Spartan-3A DSP

I Spartan-3AN

I Spartan-3E

I Spartan-3

I Spartan-ll

I Spartan-lIIE

I Spartan

I CoolRunner-II

I CoolRunner XPLA3

I Platform FLASH

I XC18Vxx Series

1XC9500

IIXC9500XL