ST X-NUCLEO-NFC12A1 NFC Card Reader Expansion Board ST25R300 13.56MHz Nucleo Shield NFC-A B F V Poller Type 1-5 Tags Arduino UNO R3 SPI FCC Certified

STMicroelectronics X-NUCLEO-NFC12A1 NFC Reader Expansion Board

The STMicroelectronics X-NUCLEO-NFC12A1 NFC reader expansion board is based on the high-performance NFC reader IC ST25R300. The configuration of this expansion board supports all five NFC Forum tag types in reader mode.

The ST25R300 in reader mode can manage standard frame encoding and decoding. It supports ISO/IEC 14443 Type A/B and ISO/IEC 15693 (single subcarrier only) and ISO/IEC 18092 communication protocols, as well as detection and read/write of NFC Forum Type 1, 2, 3, 4, and 5 tags.

The PCB and related tuning circuitry are etched with an integrated HF reader/NFC initiator/NFC target IC and antenna.

Features

1. On-board NFC reader and host card emulation IC (ST25R300)
2. NFC Forum NFC-A, NFC-B, NFC-F and NFC-V polling
3. NFC Forum NFC-A, NFC-F listener
4. 47mm x 34mm, four-turn etched 13.56MHz antenna on PCB with related tuning circuit
5. Can drive two antennas simultaneously in a single configuration
6. 6 general-purpose LEDs
7. Equipped with Arduino® UNO R3 connector
8. Free, comprehensive development firmware library, compatible with STM32Cube and examples for ST25R300
9. FCC certified
10. Compliant with RoHS directives and WEEE standards

Applications

1. Contactless payment terminals compliant with EMVCo PCD 3.2a standard
2. Access control
3. NFC general-purpose devices compliant with NFC Forum standards
4. NFC readers with WPC Out-of-Band (OOB) communication and card protection
5. NFC wireless charging (WLC) polling devices
6. WPC Ki power transmitter (PTx) communication units
7. Standard NFC devices compliant with ISO/IEC 14443 and ISO15693 standards
8. FeliCa reader/writer