Skip to main content
  • $519.99
  • Free 30-day Returns
  • Ships from China.
    Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    Analog Devices MAX14808EVSYS# MAX14808 8-Channel Digital Pulse Generator Evaluation System, Pulse Generation and Timing Control Development Board

    • Complete Evaluation System (MAX14808EVSYS#) official Maxim/Analog Devices kit containing the MAX14808 EV kit (with pre-installed MAX14808ETK+ chip), the MAXINT1 serial interface board, USB cable and GUI software everything needed to evaluate the device from a PC on day one.
    • Octal High-Voltage Pulse Generator eight channels of three-level pulse generation producing high-frequency bipolar pulses up to ±105V at up to 2A per channel, driven from low-voltage logic inputs purpose-built for piezoelectric ultrasound transducers.
    • Integrated T/R Switch & Protection on-board transmit/receive switch, active return-to-zero clamp and overvoltage protection diodes on all eight channels; no external high-voltage capacitors required saves board space in multi-channel systems.
    • Built-In Test Points for Observation 3.5mm oscilloscope probe jacks let you monitor high-voltage output waveforms directly, and flexible clock input (single-ended or differential via MAX9110, jumper-configurable) simplifies bench setups.
    • Dual-Supply HV Flexibility VPPA/VPPB from +5V to +100V and VNNA/VNNB from -5V to -100V let you tune the pulse amplitude to your transducer and application.
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    Maxim MAX14808EVSYS# Octal High-Voltage Pulse Generator Evaluation System for Ultrasound & Piezo Drive

    The MAX14808EVSYS# is the complete evaluation system for the MAX14808 Maxim's (now part of Analog Devices) octal three-level high-voltage pulse generator with integrated transmit/receive switch. The kit pairs the MAX14808 EV kit board (shipped with the MAX14808ETK+ device installed) with the MAXINT1 serial interface board, USB cable and GUI software, so you can drive and characterize high-voltage bipolar pulses from a PC without building any control hardware first.

    High-voltage pulses, generated from low-voltage logic. The MAX14808 takes simple low-voltage control inputs and produces high-frequency bipolar pulses up to ±105V with up to 2A of drive per channel the signal levels and currents needed to excite piezoelectric transducers in medical ultrasound imaging, NDT (non-destructive testing), sonar and precision piezo positioning. In the standard eight-channel, three-level configuration [verify board jumper setup for alternate modes], all eight channels work independently with consistent timing.

    Protection and integration that save you a redesign. Every channel embeds overvoltage protection diodes and an active return-to-zero clamp, and the integrated T/R switch handles the classic ultrasound transmit/receive handover on chip no bulky external HV capacitors or discrete protection networks needed. For bring-up and debugging, 3.5mm scope probe jacks give direct access to the high-voltage outputs, and the clock path is jumper-configurable (single-ended or differential via the on-board MAX9110 LVDS driver).

    A practical evaluation workflow. Power the EV kit from standard supplies (+5V VCC, +3.3V VDD, and adjustable HV rails from ±5V to ±100V), connect the MAXINT1 board over USB, and use the GUI to configure pulse patterns and timing while watching the outputs on a scope. From first pulse to full characterization, the system is designed to shorten the ramp-up on your next multi-channel HV design.

    Typical applications

    1. Medical ultrasound imaging transmit stages
    2. Non-destructive testing (NDT) and sonar transducer drive
    3. Piezoelectric actuator / transducer excitation
    4. High-voltage pulse research and multi-channel HV driver prototyping


    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: non-replaceable
    • This item is covered by CoreDepot Return Policy

    Manufacturer Contact Info

    LOADING...