Your Browsing History
Meet Your Seller
Heltec V4 Meshtastic LoRa Device with GPS 3000mAh Battery, ESP32-S3 SX1262 | Pre-assembled, Meshtastic Meshcore Compatible, L76K GNSS module, LoRa/WiFi/Bluetooth Connection, 28dBm 2MB PSRAM 16MB Flash
- PRE-ASSEMBLED V4 GPS DEVICE: Built around the Heltec WiFi LoRa 32 V4.3 with L76K GNSS, 0.96-inch OLED, matching enclosure and 915MHz antenna. The device arrives pre-assembled; the included 3000mAh battery is shipped uninstalled. Install the battery and fully charge the device before first use
- OFF-GRID MESHTASTIC & MESHCORE COMMUNICATION: Use the V4 as a Meshtastic node, portable LoRa radio or GPS-enabled mesh device for communication and location sharing beyond cellular coverage. WiFi and Bluetooth support convenient setup and firmware access for hiking, camping, field projects and mobile mesh networks
- ESP32-S3R2 + SX1262 V4.3 HARDWARE: Powered by ESP32-S3R2 and SX1262 with 2MB PSRAM and 16MB Flash. Up to 28±1dBm LoRa output and -137dBm sensitivity support reliable long-range 915MHz communication while retaining WiFi and Bluetooth connectivity
- L76K GNSS FOR LOCATION SHARING: The included L76K GNSS module adds positioning for GPS-enabled Meshtastic use, including node location and location sharing through supported app features. A practical choice for outdoor navigation, field deployments and portable mesh projects
- 3000mAh BATTERY + OLED DISPLAY: The included rechargeable 3000mAh battery supports portable use, while the 0.96-inch OLED keeps device and mesh status visible at a glance. The protective enclosure creates a compact carry-ready setup, and USB-C keeps charging and firmware work convenient
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Built around the Heltec WiFi LoRa 32 V4.3 platform, this GPS-enabled LoRa device combines the ESP32-S3R2 MCU, SX1262 radio, L76K GNSS module, 0.96-inch OLED, protective enclosure and included 3000mAh rechargeable battery in a compact setup for Meshtastic and MeshCore projects. It supports WiFi, Bluetooth and 915MHz LoRa communication with up to 28±1dBm output and -137dBm sensitivity. The device is shipped pre-assembled; the battery is included separately and must be installed and fully charged before first use. Suitable for off-grid communication, location sharing, field projects, hiking, camping and portable mesh networking.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Artbloont Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...