Pros: Extremely well built. Awesome looks. Great attention to detail.

Cons: Kinda expensive. a bit heavier then i expected.

Overall Review: Just put my case together and wow do i love it. Everything went together smoothly and the build quality on it is just awesome. The attention to detail is fantastic. My only complaint is obviously the $400 price tag, and that it's a bit heavier then I anticipated. But overall.. i'm LOVING this case.

Pros: The first thing that must be mentioned is the build quality. The driving reason for the cost, they did not cut corners. The machining and high quality materials you wont find in anything else currently available. It fits almost anything... and you have the room to fit those that it does not natively support. Some have asked about non standard board sizes, the short answer is chances are you can find one or two standoff points that will match up, which is all you really need to hold the board on. The good news is with such a high quality backing plate, you could actually drill your own holes as needed.

Cons: Odd engineering choices abound, it suffers a bit in its choice of form over function. Some issues like cross bars blocking video card ports are more annoying than others. The paint is also not a very industrial finish and is prone to chipping, particularly in places where it is metal on metal. Fans seem like an afterthought as they should be, but if that's your thing they provide 2 brackets at the bottom.

Overall Review: I have filmed a nice walk around the case with my build in it where i discuss and show everything about the case. http://www.youtube.com/watch?v=p1XnMnXZjAI In short if your using a standard ATX build you will be hard pressed to find a case more unique, or with more intrinsic value than this one. The high cost is due to its immensely high build quality. If showing off your case is not your thing there are much more functional and better valued cases out there. As is its quality and wow factor are unmatched

Pros: Great design Exceptional build quality. Easy to assemple. Logical layout.

Cons: Very tall CPU heatsinks may not fit.

Overall Review: OK, this is a limited edition expensive case. It's an indulgence, not a need. If you are looking for best bang for your buck, it's not it, that's for sure. If you are looking for a great looking case then this is probably the best choice out there right now, since everything else out there is either too plain or too tacky. One thing I realized about open cases - they actually collect less dust because closed cases inevitably suck massive quantities of fine dust in, no matter how good your filters, and it sticks to everything and very hard to get off. An open case like this one is easy to maintain - just blow some compressed air inside once in a while and you are all set. It actually catches the attention of non-techie people, once someone told me that it looks like Centre Georges Pompidou in Paris :)

Pros: VERY HIGH QUAILTY-easy to put tighter-took maybe 1 hour to assemble.Presion build. lots of room for a simple build

Cons: Only 1- 5.25" bay. Would have liked some thumb screws for PCI slots.

Overall Review: I plan on water cooling witch may take some real thought but I am sure it wll work out

Pros: Open Air Design. I just love the open air design of this case. I was expecting it to be heavy but to my surprise, the Framing was light. The open air design helps to keep the airflow going and the components run cool. People say dust will accumulate but they dont understand that since it is open design, there is no way of dust getting accumulated. It even fits a Watercooling kit with upto 120mm fans nicely. The open design shows off the components nicely. The tempered glass I prefer over acrylic coz honestly methinks acrylic feels cheap. Also, the cables are somewhat nicely sleeved for the USB, Audio connection ports.

Cons: None atleast till now

Overall Review: I will have to see when I upgrade to Ivy Bridge E, how does this case keeps my components clean coz i plan to obviously OC the chip. I feel that in this case, the watercooling option is somewhat limited. We can only use a All in one kit. But will post back when I try to upgrade. Till then this case gets 5 eggs from me.

Pros: very good looking, industrial. well built - like a tank. easy to maneuver. cable routing is clean and easy. using the noctua U9B with a single fan with no issues -- not overclocking. not using any other case fans either. so super quiet.

Cons: will not fit the noctua D14; would have been nice to have support for more than one dvd drive. easy to hit the power button instead of the dvd drive button.

Pros: Superior build! As stated in other reviews this case is premium quality construction. I can't get over how *not* flimsy it is. 90 degree mobo mounting is a stroke of genius for heat dissipation, but has disadvantages (see below.) Definitely the best built case available today.

Cons: Only one 5 1/2 inch bay. Thumb screws for PSU seem somewhat flimsy. Mobo mounting makes cable routing for monitors etc. a bit of a challenge. Especially since this case does not belong on the floor. It begs to be seen and should be placed appropriately. (Not a con but needs to be considered.)

Overall Review: Got Cougar Turbine CF-T12S4 120mm Case Fan to match, a perfect fit.

Pros: Fantastic look. Reasonably easy install provided you understand/appreciate good cable management. (It is windowed on both sides good cable management is a must imo. The cable hold-ons are nice, strong, and you place them where you need them. Putting the case together was actually a lot and brilliantly simple, much like putting a computer together. Strong feel and great build quality, not a single chip of paint when i put my build in.

Cons: My particular case shipped missing one of the exterior thumbscrew, however once i contacted INWIN they took my address down and shipped the missing piece, no charge to me, so no eggs removed, kudos to INWIN. The pictures in the instruction manual could have been a bit clearer, particularly in regards to the orientation of some objects but common sense helps. Minor gripe.

Overall Review: Wanted to address a few things; Dust- Really isn't a problem for me, but then i'm of those people who cleans my case once a month roughly. That being said i haven't cleaned my case yet ( I've had it for just under a month now) and there isn't any noticeable dust. Spilling drinks- or any objects into the case wasn't a factor for me. For one this case doesn't nor will i ever sit it on the floor. It's a case meant to show off, so i keep it on a desk, and take care of my equipment. Price- Should never be a con unless you don't receive a quality product like you were expecting. I received the product i wanted and am very happy with my case. Some things to note; Size- The case has a depth similar to that of a full tower, with a height not much more than a mid tower imo. CPU Coolers- I couldn't find the data anywhere but it looks like air coolers of 160 mm or less will fit(the cooler will touch the glass) I'll test this with a NH-D14 once Haswell is released to confirm. Also SATA cable's length might be a problem for some people depending on how and on which side you install your SSD's if you have any. My ASUS mb came with cables long enough, but still something to keep in mind. In conclusion, I love my case, its quiet, clean, and looks fantastic. If you are willing to pay the premium price for a premium case, and willing to take care of your computer then this case is an awesome buy!