Question 1

How fast does it start accumulating dust? And is there an easy way to clean it?

Accepted Answer

Hi, there is nothing practical about the S-FRAME.  That said it is very solid and has a powerful aesthetic.  You may find yourself having to customize the case to accommodate various components or cable runs/etc.  For example I had to fabricate a custom mount for the Aquaero.  As for "DUST", yes I expect this to be a problem over time although it has been shown (cant recall the study I read) that dust does not effect components as much as we all think.  I have it up on the desk and shoot some compressed air over the MB every other day and it looks very clean.  Good luck!

Question 2

how many more units will inwin make?

Accepted Answer

it was a limited run already the black and red is near impossible to find... if you want one get it when you can there is no guarantee they will make more.   When they say limited run in my experience they mean it. I have several inWin cases that were limited run and they were exactly that :) hope this helps.

Question 3

Hello

I want to know if my components will fit in this case ?

ASUS Rampage IV Extreme LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 Extended ATX Intel Motherboard

Mushkin Enhanced Redline 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model 994057

Intel Core i7-3930K Sandy Bridge-E 6-Core 3.2GHz (3.8GHz Turbo) LGA 2011 130W BX80619i73930K Desktop Processor

CORSAIR Hydro Series H100 (CWCH100) Extreme Performance Liquid CPU Cooler

ASUS ROG RAIDR Express PCI-E 240GB PCIe 2.0 x 2 MLC Internal Solid State Drive (SSD)

ASUS GeForce GTX TITAN X GTXTITANX-12GD5 12GB 384-Bit GDDR5 PCI Express 3.0 HDCP Ready SLI Support Video Card

Accepted Answer

As with any case you will want to check your component measurements but on initial look you look fine. Where most people run into trouble on this case is with the CPU cooler and the clearance on the motherboard for memory after the CPU cooler is installed.  I have two Nvidia GTX 980 kingpin classified in my case with no issue (those are pretty large cards) I believe your components will fit the case just fine where you need to concentrate focus is on the mother board and making sure all your components fit ( I have had issues where graphics cards impede PCI slots and I can't get solid state drives into them or my memory coolers are too large to fit below my CPU cooler etc.

Question 4

When will this restock?

Accepted Answer

Hello,

Thank you for contacting us with your question. There are many reasons why an item may be discontinued. Most of the time, it has to do with the manufacturer releasing a newer model.

The item may or may not be restocked, you can always continue looking to see if its something we offer.

Hope this helps out!

Thank you, 
Newegg Support

Question 5

Will the s-framebe in stock again?

Accepted Answer

Hello,

Thank you for contacting us in regards to your question.  The item currently shows that it is available.

Thank you, 
Newegg Support

Question 6

Just unboxed my s frame, curious if the red edition was the only serial numbered run they did. If so is there an estimate of how many gold cases will be released? My interior badge has no serial, kind of nit-picky as this is an awesome product and looks better in person than in the pictures. Thanks.

Accepted Answer

Only the red cases were serialized as special editions.

Material	4mm Aluminum, Tempered Glass
Internal Drive Bay	3.5" or 2.5" x 4
M/B Form Factor	ATX / Micro-ATX
Power Supply	ATX12V, PSII and EPS Power Supply Mounting Area Length up to 300mm / Height up to 95mm
I/O Port	USB3.0 x 4, HD Audio
I/O Expansion Slots	PCI-E Slot x 8 Supports High-end Graphic Card (Length: up to 340mm, Height: up to 160mm)
Thermal Solution	Supports - 120mm Bottom Fan x 3 - 360mm Liquid Cooling Radiator (width up to 135mm) - CPU heatsink up to 195mm
Dimensions (H x W x D)	560 x 313 x 755mm, 22" x 12.3" x 29.7"
Net Weight	17.41kg
Gross Weight	23.2kg

Brand	IN WIN
Model	S-FRAME (BLACK/GOLD)

Type	Open-Air
Color	Black
Case Material	Aluminum / Tempered Glass
With Power Supply	No
Power Supply	Support ATX12V/EPS size(Up to 220mm)
Motherboard Compatibility	Micro ATX / ATX
Side Panel	without Side Window

Internal 3.5" Drive Bays	3.5" or 2.5" x 4
Expansion Slots	8, support high-end graphic card (Length: up to 340mm, Height: up to 160mm)

Dimensions	22.00" x 12.30" x 29.70"
Weight	38.36 lbs.

IN WIN S-FRAME (BLACK/GOLD) Black Aluminum / Tempered Glass Open-Air Computer Case Support ATX12V/EPS size(Up to 220mm) Power Supply

In Win S-FRAME (Black/Gold) Black Aluminum / Tempered Glass Open-Air Computer Case

Elegant Metal Curves One Piece Construction

Dual Color Design Double Visual Enjoyment

Meticulous Engineering Shining Polished Edge

Tempered Glass Extended Vision

Open Frame Structure Independent Airflow Design

Unique Limited Editon Number

Specifications

Learn more about the In Win S-FRAME (BLACK/GOLD)

Customer Reviews of the In Win S-FRAME (BLACK/GOLD)

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811108469