Question 1

Would the following two components would fit?

- CORSAIR TX Series CMPSU-750TX  (5.9"(W) x 3.4"(H) X 6.3"(L))
- ASUS Radeon R9 290X DirectCU II  (11.3" x 5.8")

Accepted Answer

Both will fit. However, you will not be able to use both HDD racks with a standard size PSU. This isn't so bad since you can stack up to five HDDs/SSDs in one of the racks. I have this case coupled with a EVGA GTX 970 4GB, Gigabyte micro ATX mobo, four Seagate 2TB HDDs, and an EVGA 650 P2 PSU all in this case. Not to mention, there is a custom water loop that's cooling the GPU and CPU in it. Tight fit, but works like a dream. Got a 4790K OC'd to 4.8Ghz in this rig. I do recommend getting better fans. I put four Noctua Redux 140mm fans in this (removed the cut out plate on the top panel for fan and radiator) and they work wonderfully. Good solid build.

Question 2

Will this fit a 212 Evo CPU cooler? (158.5 mm Height)

Accepted Answer

I was able to fit a custom water loop in this sucker, but I would not recommend that unless you knew what you were doing. This case was not intended to have anything super hot, so main you would need to stay with coolers about the size of the stock coolers that Intel sometimes includes with their CPUs. The Arctic one Cliff mentioned is pretty much a glorified stock cooler that does run surprisingly well. Will be better than Intel's for sure, but the price is debatable.

Question 3

Support for a 5.6" tall/ height / wide in a tower, GPU?

Accepted Answer

I was using two (2) EVGA GTX 580's on this case when I initially purchased it. Currently, I'm using two (2) EVGA GTX 960's. Both video cards are at the maximum length. Also, my motherboard is EVGA X58 Classified 3, which is an E-ATX form factor, so, you have plenty of room in this case for beefy components. Height-wise, you CAN NOT use a tower cooler. You need to use a low profile cooler (I'm currently using Thermalright AXP-200). Hope this helps!

Question 4

Will the case fit an xfx double dispersion r9 290?

Accepted Answer

It looks to be the same size as my Sapphire 280X Vapor-X 2 fan version that fits in the case so I would say yes.

Question 5

Will this fit a 120mm Watercooled CPU Block?

Accepted Answer

Yes, it can handle up to 140mm rads/fans. However, space is crucial, so going with a radiator of 45mm thickness or less is all you can do. You might even need to get a 15mm thick fan depending on how skilled you are with the install. I have a 140mm Alphacool rad with a Noctua 140mm fan installed directly over my CPU waterblock. I'm using a dual bay reservoir as well.

Question 6

where can I get the fan grill for the top cover plate?

Accepted Answer

Go to Lian-Li's website. They sell these grills on there. I got the smallest pack that included two grills for only a few bucks.

Question 7

What are the dimensions of this case?

Accepted Answer

HEIGHT 7.17"
Width  17.52"
Depth  16.14"

Question 8

Three questions: 1. Will I need to buy separate drive brackets for SSDs or are the same ones compatible inside the case? 2. Will this fit an ATX 12V / EPS 12V PSU? 3. Will this support a 120mm Watercooled CPU block?

Accepted Answer

There are included screws to mount ssds. Yes it fits an ATX case, check the Lian Li site to check PSU sizes. It will fit up to 140mm tall CPU cooler.

Brand	LIAN LI
Model	PC-C60B

Type	ATX Media Center / HTPC Case
Color	Black
Case Material	Aluminum
Power Supply	No
Motherboard Compatibility	ATX / Micro-ATX / Mini-ITX
Side Window	No

External 5.25" Drive Bays	2
External 3.5" Drive Bays	None
Internal 3.5" Drive Bays	6 (Can be convert to 2.5" HDD)
Internal 2.5" Drive Bays	3
Expansion Slots	7

Front USB Ports	USB 2.0 x 1; USB 3.0 x 1
Front FireWire Ports	No
Front Audio Ports	HD Audio
Front eSATA Ports	e-SATA x 1
Front Card Reader	No
Remote Control Module	No
Front Display	No

140mm Fans	140mm Front Fan x 2 Included 140mm Top Fan Hole x 1 (Fan NOT Included)
Side Air duct	No
Dust Filters	Yes

LIAN LI Black Aluminum PC-C60B ATX Media Center / HTPC Case

Learn more about the Lian Li PC-C60B

Customer Reviews of the Lian Li PC-C60B

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811112335