Question 1

Typing on an iPad, take two.

Can you put a Micro ATX MOBO I in this case?

Accepted Answer

Shouldn’t be a probem. I got this with a KIT and the board we used is an ASUS M5A78L-M/USB3 which is a Micro ATX form factor. See link below to view motherboard we have, it really nice: http://www.newegg.com/Product/Product.aspx?Item=N82E16813131942&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel-_-Content-_-text-_- Hope this helps :-) Jason.

Question 2

Does this have HDMI or VGA because the monitor i want only has those? if not want kind of output for monitors is there?

Accepted Answer

Hot Dipped Galvanized Steel ATX Mid Tower
2 x USB 2.0, 2 x USB 3.0, 2 x Front HD Audio Ports
500W Power Supply (Model: DR-8500BTX).
The HDMI and VGA video conectors they need to be in your video board that is not included here in the case

Question 3

Is the 20+4 pin power connector the same or equivalent to the standard 24 pin EATX power connector on a motherboard?

And it does have the 8 pin EATX 12V power connector?

More specifically will this support the ASUS Z87 Pro (V) motherboard?

Accepted Answer

The 20pins has an additional 4 pins to adapt to the standard 24 pin. I personally used an Asus p8z77 motherboard so I see no reason why yours wouldn't fit. It had all the connectors needed to hook up video cards too including the 12v plug

Question 4

The front panel connector isnt like just one connection, it is broken up into, hdd led, +p led, -p led, reset switch, and power switch, so i dont know which order they go in on the board. Anyone able to help me with this?

Accepted Answer

That will depend entirely on your motherboard.  Usually this connector is in the lower right hand corner of the motherboard (assuming mounted in a tower case such as this with the back panel connectors on the left).  It will often have difficult to read silk-screening directly on the mobo but an easily readable legend in the owners manual saying what pin is what.

Question 5

Under specifications it says "1x Front 80/90/120mm fan (optional)"... However, I can't seem to get a 120mm fan in the front, the bays are too narrow and it doesn't fit between the front panel and the case.. So, was this a misprint or am I just missing something here.????

Accepted Answer

EDIT... The 120mm fan does fit, there just aren't any large holes available for the screws.. I drilled out two holes and only used two screws on one side.. The other side, once drilled, the holes were not accessible from inside the bay area.. It'll have to do...

Question 6

Is the 20+4 pin power connector the same or equivalent to the standard EATX power connector on a motherboard?

And it does have the 8 pin EATX 12V power connector?

More specifically will this support the ASUS Z87 Pro (V) motherboard?

Accepted Answer

I used this case for an Asus Z87 Plus motherboard at work - virtually the same as the Pro - which I have for my home PC. I bought a $2 adapter to convert 2 4 pin connectors to an 8 pin (there were plenty of extra 4 pins) - got that through Newegg too if memory serves. As for the 20 + 4 - yes - I think it will work fine for the Z87 Pro. Good luck to you!

Question 7

Can you pit a mice atx mobo in this case?

Accepted Answer

The case has multiple fittings for various sizes of motherboards. I don't see why you couldn't.

Question 8

Does the mainboard tray flip out to lie flat for easy access?

Accepted Answer

No the side slides off but the motherboard stays inside on the other side.

Question 9

Front panel connector - Is there some information on the +/- wire colors for the LED connections?

Accepted Answer

I can't remember if they had a + or - written on them. But either way you have a 50/50 chance of getting it right. Generally colored or the brighter wires are positive.

Question 10

Is it dual voltage (110v and 220v)?  I'm temporarily out of the US right now.

Accepted Answer

Yes all PSU's have a 110/220 switch

Brand	Rosewill
Model	R536-BK

Type	ATX Mid Tower
Color	Black
Case Material	Hot Dipped Galvanized Steel
With Power Supply	500W
Power Supply	500W (Model:DR-8500BTX)
Power Supply Mounted	Top
PSU Main Connector	20+4Pin
Motherboard Compatibility	Micro ATX / ATX
Side Panel	without Side Window

External 5.25" Drive Bays	3
External 3.5" Drive Bays	1
Internal 3.5" Drive Bays	5
Expansion Slots	7

Max GPU Length	280 mm
Max CPU Cooler Height	150 mm
Dimensions	18.75" x 7.25" x 16.00"
Weight	16 lbs.

Rosewill - Black, Hot-Dipped Galvanized Steel ATX Mid Tower Computer Case with 500W Power Supply - R536-BK

Learn more about the Rosewill R536-BK

Customer Reviews of the Rosewill R536-BK

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811147193